ANALYSIS OF BUCKLING AND BENDING FAILURE OF ALUMINIUM COLUMN SECTIONS USED IN EMERGENCY RESTORATION TOWERS

摘要

This paper presents an experimental analysis of buckling and bending failure modes of a 2.58 m long, 460×460 mm~2 6061-T6 Aluminum alloy column section used in emergency restoration towers. The main objective is to determine the bending and buckling load capacities of the column section through experiments, as these values are critical in an emergency tower (guyed mast) design. Within the context of this overarching goal, a secondary objective is to ascertain whether the presence of certain manufacturing non-conformance affects the loading capacity of the section significantly. Finally, finite-element analysis (FEA) simulations are conducted in order to compare the experimental data with numerical results. The results show that the ultimate bending and buckling load capacities of the column section are 383 kN and 3,868 kN respectively. Furthermore, the results indicate that the presence of manufacturing non-conformances such as air bubbles and delamination do not have a detrimental effect on the load capacity of the column. Of the two non-conformances studied, the specimen with bubbles had a 1% difference from the good specimen, and the delaminated specimen had a 10% deviation. Comparison of experimental data with FEA simulation results shows that the numerical solution tends to overestimate the stiffness of the column, and that the FEA approach may require further calibration.