首页> 外文会议>International Symposium on Mine Safety Science and Engineering >Research on the Rapid Measurement Technique of Gas Content
【24h】

Research on the Rapid Measurement Technique of Gas Content

机译:煤气含量快速测量技术研究

获取原文

摘要

Gas content is basic data for preventing gas disaster. So it is especially important for rapidly measuring gas content. Based on the experiments of typical mines' coal samples in China, the rapid measurement nonlinear surface model of gas content was established by using theoretical analysis and nonlinear regression method and the rapid measurement instrument and parameters modified instrument were developed. The results showed that there was high nonlinear surface relationship among the desorption characteristic parameters value a, i and gas content W. The rapid measurement nonlinear surface model can well describe the relationship among value a, i and gas content W. The rapid measurement instrument can rapidly measure the gas content in the coal seam in 20 minutes. The error is less than ten percent. The performance is better than similar products both at home and abroad. It can meet the requirement of the project measurement of gas content.
机译:气体含量是防止煤气灾害的基本数据。因此,对于快速测量煤气含量尤为重要。基于中国典型矿山煤样的实验,通过使用理论分析和非线性回归方法建立了煤气含量的快速测量非线性表面模型,并且开发了快速测量仪器和改性仪器。结果表明,解吸特性参数值A,I和气体含量W.快速测量非线性表面模型中存在高的非线性表面关系。快速测量值A,I和气体内容W.快速测量仪器可以在20分钟内快速测量煤层中的气体含量。错误小于10%。性能优于国内外产品。它可以满足气体含量的项目测量的要求。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号