首页> 外文会议>International Conference on Environmental Systems (ICES) >Effect of Catalyst Support on the Photocatalytic Destruction of VOCs in a Packed-Bed Reactor
【24h】

Effect of Catalyst Support on the Photocatalytic Destruction of VOCs in a Packed-Bed Reactor

机译:催化剂载体对填充床反应器中VOCS光催化破坏的影响

获取原文

摘要

The removal of volatile organic compounds (VOCs) from the air aboard spacecrafts is necessary to maintain the health of crewmembers. The use of photocatalysis has proven effective for the removal of VOCs. A majority of studies have focused on thin films, which have a low adsorption capacity for contaminants and intermediate oxidation byproducts. Thus, this study investigates the use of adsorbent materials impregnated or coated with titania to: (1) provide a system that can remove VOCs for a period of time in the absence of UV irradiation to reduce power requirements and/or offer contaminant removal in the event of lamp failure and (2) improve the photocatalytic oxidation efficiency by concentrating VOCs and intermediate oxidation byproducts near the surface of the photocatalyst. Two adsorbent materials (porous silica gel and BioNuchar 120 activated carbon) and glass beads were tested as catalyst supports for the destruction of a target VOC, in this case methanol (Co = 50 ppm_v). These materials were tested in annular reactors of two different sizes (8 mm and 25 mm) for methanol removal via adsorption (i.e., in the dark) and simultaneous adsorption and oxidation (i.e., in the presence of UV light). In addition, the effect of relative humidity (12% and 95%) was studied to evaluate the competitive effects of water vapor on each system. In the case of high (95%) relative humidity, the titania-coated carbon and silica-titania composite performed similarly in the small annulus reactor achieving about 95% methanol removal while the titania-coated glass beads performed slightly worse, achieving between 80 and 90% removal. The titania-doped adsorbent materials performed similarly in the large annulus reactor, achieving about 50% methanol removal. When the influent stream contained a low (12%) relative humidity, both the silica-titania composite and titania-coated carbon achieved a greater methanol adsorption capacity and higher methanol oxidation rate.
机译:从船上航天器中除去挥发性有机化合物(VOC)对于维持船员的健康是必要的。使用光催化的使用已经证明有效地去除VOC。大多数研究都集中在薄膜上,其吸附能力低,污染物和中间氧化副产物。因此,本研究研究了浸渍或涂有二氧化钛的吸附材料的用途:(1)提供一种可以在没有UV辐射的情况下去除VOC的系统,以降低功率要求和/或提供污染物去除灯故障的事件和(2)通过在光催化剂表面附近浓缩VOC和中间氧化副产物来改善光催化氧化效率。测试两种吸附材料(多孔硅胶和Bionuch100活性炭)和玻璃珠作为催化剂载体,用于破坏目标VOC,在这种情况下甲醇(CO = 50ppm_v)。在两种不同尺寸(8mm和25mm)的环形反应器中测试这些材料,用于通过吸附(即,在黑暗中)和同时吸附和氧化(即,在UV光的情况下)中的甲醇去除。此外,研究了相对湿度(12%和95%)的效果,以评估水蒸气对每个系统的竞争效果。在高(95%)相对湿度的情况下,在小环反应器中同样地进行二氧化钛涂覆的碳和二氧化硅 - 二氧化钛复合材料在达到约95%的甲醇去除时进行,而二氧化钛涂覆的玻璃珠略差,达到80或拆除90%。二氧化钛掺杂吸附剂材料在大环形反应器中类似地进行,实现约50%的甲醇除去。当流入物流含有低(12%)的相对湿度时,二氧化硅 - 二氧化钛复合材料和二氧化钛涂覆碳均采取更大的甲醇吸附能力和更高的甲醇氧化速率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号