首页> 外文会议>INTERNATIONAL TELEMETERING CONFERENCE >ULTRA HIGH BIT RATE (UP TO 1GBIT/S) BANDWIDTH EFFICIENT FQPSK ALL-DIGITAL MODULATOR/DEMODULATOR ARCHITECTURES AND NASA IMPLEMENTATIONS
【24h】

ULTRA HIGH BIT RATE (UP TO 1GBIT/S) BANDWIDTH EFFICIENT FQPSK ALL-DIGITAL MODULATOR/DEMODULATOR ARCHITECTURES AND NASA IMPLEMENTATIONS

机译:超高比特率(最多1Gbit / s)带宽高效的FQPSK全数字调制器/解调器架构和NASA实现

获取原文

摘要

The paper presents ongoing efforts at NASA's Goddard Space Flight Center and the Jet Propulsion Laboratory to develop ultra high bit rate bandwidth efficient FQPSK modulators and demodulators. The ability to transmit and receive ever-increasing amounts of extremely high rate data is an enduring challenge in the arena of near-earth space borne science missions. Reliable and efficient transmission of information at these data rates requires the use of power and bandwidth efficient modulations that exhibit low transmitter, receiver, and decoder complexity. Conventional high rate approaches for achieving spectral limiting typically employ sharp post amplifier filtering at the transmitter to limit the interference to the adjacent bands. However, using analog filtering alone can produce substantial intersymbol interference and other distortions that substantially affect the detection performance of the signal. In contrast, various theoretical classes of modulation waveforms can be tailored to provide varying degrees of bandwidth and power efficiency or robustness to non-linear transmitter distortions while incurring little or no performance losses. In order to realize many of these signal types, precise amplitude and phase control over the synthesis of these signals is required, typically necessitating the use of digital signal processing.
机译:本文展示了美国宇航局戈达德太空飞行中心和喷射推进实验室的持续努力,开发超高比特率带宽高效的FQPSK调制器和解调器。传输和接收不断增加的极高利率数据的能力是近地球空间传播科学任务的持久挑战。这些数据速率的可靠性和有效的信息传输需要使用具有低发射器,接收器和解码器复杂性的功率和带宽高效调制。用于实现光谱限制的传统高速率方法通常在发射器处采用尖锐的柱柱滤波以限制对相邻频带的干扰。然而,单独使用模拟滤波可以产生实质的偶尔ymbol干扰和基本上影响信号的检测性能的其他失真。相反,可以根据各种理论类别的调制波形进行调制波形,以提供不同程度的带宽和功率效率或对非线性发射器失真的鲁棒性,同时产生很少或没有性能损失。为了实现许多这些信号类型,需要对这些信号的合成来进行精确的幅度和相位控制,通常需要使用数字信号处理。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号