首页> 外文会议>Pacific Rim International Conference on Advanced Materials and Processing >The Effect of RE-Mg on Thermal Fatigue Resistance of Cast High Speed Steel (HSS) Rolls
【24h】

The Effect of RE-Mg on Thermal Fatigue Resistance of Cast High Speed Steel (HSS) Rolls

机译:RE-MG对铸造高速钢(HSS)辊热疲劳电阻的影响

获取原文

摘要

The influence of rare earths(RE) and Mg compound modification on eutectic carbide morphology and matrix of high speed steel(HSS) roll was investigated. The results show that the matrix can be refined by the RE-Mg compound modifier, the eutectic carbides are inclined to turn into small lump, whose distribution is homogeneous. After modification, the heat conductivity coefficient of HSS is increased and heat expansion coefficient is decreased. Moreover, RE-Mg modification is able to increase the cycles of thermal fatigue crack initiation and decrease the propagation rate. After cycling 700 times at the condition of heating at 600 deg C and cooling in 25 deg C water, the length of thermal fatigue crack is lessened by 41.12 percent.
机译:研究了稀土(RE)和Mg化合物改性对高速钢(HSS)辊的共晶碳化物形态和基质的影响。 结果表明,基质可以通过RE-Mg化合物改性剂改进,共晶碳化物倾斜以变成小肿块,其分布是均匀的。 在修改之后,增加了HSS的导热系数,并且减少了热膨胀系数。 此外,RE-MG改性能够增加热疲劳裂纹引发的循环并降低传播速率。 在600℃加热条件下循环700次并在25℃水中冷却后,将热疲劳裂纹的长度减少41.12%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号