首页> 外文会议>International Astronautical Congress >LOW COST, SYSTEMATIC SOFTWARE AND HARDWARE PROCESSES INCLUDING ON BOARD COMPUTER IN LOOP SIMULATION AND HARDWARE IN LOOP SIMULATIONS FOR 'PRATHAM' STUDENT SATELLITE, IIT BOMBAY
【24h】

LOW COST, SYSTEMATIC SOFTWARE AND HARDWARE PROCESSES INCLUDING ON BOARD COMPUTER IN LOOP SIMULATION AND HARDWARE IN LOOP SIMULATIONS FOR 'PRATHAM' STUDENT SATELLITE, IIT BOMBAY

机译:低成本,系统软件和硬件过程,包括在循环仿真和硬件的电脑上,“Pratham”学生卫星的环路模拟,IIT孟买

获取原文

摘要

Students from the Indian Institute of Technology Bombay (IITB) are currently in the process of building a plug and play micro-satellite bus "Pratham" in collaboration with the Indian Space Research Organization. There are two main electronic boards on Pratham viz. On Board Computing board which hosts the core controller of the satellite, and the Power Board which distributes power to different loads on the satellite. The requirement imposed by ISRO on the success rate of electronic circuit boards in student satellite is 99%. The testing procedures are categorized as hardware testing and software testing. The paper will discuss the standard procedures followed mainly in Hardware testing of the aforementioned Electronic Circuit Boards involved in the making of Pratham. Step by step process for the hardware testing is used. The software testing is done by real time On-board In Loop Simulation (OILS)' where atmospheric and gravity conditions are simulated using standard environment models while GPS, magnetometer and magnetorquer are simulated by hardware interfaces that are mimicked exactly. This will test and validate the hardware interfaces and software accuracy. Sensors and actuators are simulated using Hardware In Loop Simulation (HILS). There are various sensors viz. GPS, Magnetometer and Sun-sensor which give input to the OBC board which then calculates the control inputs required to achieve the desired attitude. The setup used in testing these sensors/ actuators along with OBC board and their results are also included. The testing procedures in both the circuit boards are broken down into various levels with level 0 as fabrication and soldering precautions set by ISRO while final level as integrated testing of entire circuit board. A generalized and systematic troubleshooting procedure for Electronic Circuit Boards is included as well.
机译:来自印度理工学院博国(IITB)的学生目前正在与印度空间研究组织合作建立一个插头并播放微卫星公共汽车“Pratham”。 Pratham viz上有两个主要的电子板。在托管卫星核心控制器的船上计算板上,以及将电源分配到卫星上不同负载的电源板。 ISRO对学生卫星电子电路板成功率施加的要求是99%。测试程序被分类为硬件测试和软件测试。本文将讨论标准程序,主要是在涉及Pratham制作的上述电子电路板的硬件测试中。使用逐步进行硬件测试的过程。软件测试是通过实时在循环仿真(油)上的载板上完成的,其中使用标准环境模型模拟了大气和重力条件,而GPS,磁力计和磁仪模拟由模拟的硬件接口模拟。这将测试并验证硬件接口和软件准确性。使用环路仿真(HIL)中的硬件模拟传感器和执行器。有各种传感器viz。 GPS,磁力计和太阳传感器,其向OBC板提供输入,然后计算达到所需姿态所需的控制输入。还包括用于测试这些传感器/执行器以及OBC板及其结果的设置。电路板中的测试程序被分解为各个级别,含量为0,作为由isro设置的制造和焊接预防措施,而最终水平作为整个电路板的集成测试。还包括电子电路板的广义和系统故障排除程序。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号