首页> 外文会议>International Conference on Composite Materials >Fabrication and mechanical properties of short sisal fiber reinforced composites used for dental application
【24h】

Fabrication and mechanical properties of short sisal fiber reinforced composites used for dental application

机译:用于牙科应用的短剑纤维增强复合材料的制造和力学性能

获取原文

摘要

This study investigated the influence of short sisal fiber on the flexural strength and modulus of autopolymerized denture base resin. The effects of untreated (UT) and silane treated (ST) sisal fiber with the length of 2 mm at various concentrations, i.e. 2.5, 5.0, 7.5, 10.0 wt%, were compared. The results showed, wt 10% ST sisal fiber reinforced denture base resin had about the same flexural strength with that of denture base resin without fiber reinforcement, and sisal fiber concentrations lower than wt 10% caused reduction of the flexural strength of denture base resin. Flexural modulus increased with sisal fiber reinforcement, what's more, improvement of ST fiber was more obvious.
机译:本研究研究了短剑束纤维对自与抗牙底树脂弯曲强度和模量的影响。比较了未处理(UT)和硅烷处理(ST)硅烷纤维的效果,在各种浓度下具有2mm的长度,即2.5,5.0,7.5,10.0wt%。结果表明,WT10%ST Sisal纤维增强义齿基材具有大约相同的弯曲强度,牙本质基层树脂没有纤维增强,并且Sisal纤维浓度低于WT的10%引起义肢底层树脂的弯曲强度降低。弯曲模量随着Sisal纤维增强而增加,更重要的是,ST纤维的改善更加明显。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号