首页> 外文会议>ASME/JSME Joint Fluids Engineering Conference >FIBER ORIENTATION AND CONCENTRATION DISTRIBUTION IN A CONCENTRATED SUSUPENSION FLOW THROUGH A COMPLEX GEOMETRY
【24h】

FIBER ORIENTATION AND CONCENTRATION DISTRIBUTION IN A CONCENTRATED SUSUPENSION FLOW THROUGH A COMPLEX GEOMETRY

机译:浓缩悬浮液中的纤维取向和浓度分布通过复杂的几何形状

获取原文

摘要

Distributions of fiber orientation and fiber concentration in slit flows of concentrated suspensions were measured. Slit channels were used in the experiments: a channel with an abrupt expansion and a crank geometry with six L-shaped corners. Such channels are usually used in a polymer processing. For visualization of fibers, an index-of-refraction matching method was employed, and tracer fibers having birefringence were suspended to observe between crossed polarizers. When fibers flow through an abrupt expansion, they rapidly orient in the direction perpendicular to the flow direction near the centerline. The fiber orientation, however, returns to the flow direction in the downstream region. In the L-shaped corner, fibers randomly orient because of the decelerating flow. In the downstream region of the L-shaped comer, fiber orientation is not symmetric with respect to the centerline. This seems to result. from fiber-fiber interactions in the concentrated suspension. The fiber concentration is uniform over a width of a channel except adjacent to the side wall in the concentrated suspension, while it has a maximum apart from the side wall in the dilute suspension.
机译:测量浓缩悬浮液的狭缝流动中纤维取向和纤维浓度的分布。在实验中使用狭缝通道:具有突然膨胀的通道和具有六个L形角部的曲柄几何形状。这种通道通常用于聚合物加工。为了可视化纤维,采用折射率匹配方法,并且将具有双折射的示踪纤维悬浮在交叉的偏振器之间观察。当纤维通过突然的膨胀时流动,它们在垂直于中心线附近的流动方向的方向上快速定向。然而,纤维取向返回到下游区域中的流动方向。在L形角落中,由于流动减速,纤维随机定向。在L形角度的下游区域中,纤维取向相对于中心线不对称。这似乎是结果。从浓缩悬浮液中的纤维纤维相互作用。除了浓缩悬浮液中的侧壁的宽度之外,纤维浓度在通道的宽度上是均匀的,而其在稀释悬浮液中的侧壁上具有最大值。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号