首页> 外文会议>International Conference on Cyclotrons and Their Applications >Extraction of D~- beams from the cyclotron JULIC for injection into the cooler synchrotron COSY
【24h】

Extraction of D~- beams from the cyclotron JULIC for injection into the cooler synchrotron COSY

机译:从回旋加速器喷射进入冷却器同步舒适时的D〜梁提取

获取原文

摘要

The cooler synchrotron COSY was intended from its inception to provide also deuteron beams which, in addition to protons, could considerably expand the range of experiments accessible at this accelerator facility. A major obstacle to deliver the required D~- beams with the injector cyclotron JULIC has been its electrostatic septum deflector at extraction. After the conversion of JULIC into a negative ion machine, operation of the original deflector at the voltage levels necessary for D~- extraction proved to be impossible with reversed polarity due to severe electrical strength problems like sparking and dark currents. The design and development of a suitable septum deflector turned out to be a challenging and tedious process lasting several years. The new device is in operation since January 2000 and the cyclotron was successfully tested in October for delivering D~- beams at 75 MeV with an extracted current in the order of 10 μA. Development, test procedures and characteristics of the new electrostatic septum deflector are reported together with its operational performance to date. Results achieved during the first test run with D~- ions are presented, including injection and acceleration of the dueteron beam in COSY.
机译:较冷的同步舒适旨在从其初始化以提供除了质子外,除了质子之外,还可以大大扩展该加速器设施可接近的实验范围。用喷射器回旋加速器朱瓦提供所需的D梁的主要障碍是其萃取时的静电隔膜偏转器。在将Julic转换为负离子机之后,由于火花和黑暗电流等严重的电力问题,因此在D〜 - 提取所需的电压水平下,原始偏转器的操作被证明是不可能的。合适的隔膜偏转器的设计和开发证明是持续数年的具有挑战性和繁琐的过程。自2000年1月以来,新设备正在运行,并在10月份成功测试了回旋加速器,以便在75 MeV下提供D梁,其中提取的电流为10μA。新的静电隔膜偏转器的开发,测试程序和特性及其迄今为止的运作表现。提出了在第一次试验过程中实现的结果,包括Dueteron梁在舒适的注射和加速度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号