首页> 外文会议>MRS Meeting >The influence of growth rate on porosity in Al-Pd-Mn icosahedral quasicrystals
【24h】

The influence of growth rate on porosity in Al-Pd-Mn icosahedral quasicrystals

机译:Al-PD-MN ICOSAHEDRAL Quasicrystals中生长速率对孔隙率的影响

获取原文

摘要

Growth experiments have been carried out to characterize the occurrence and development of porosity in Bridgman and flux grown Al-Pd-Mn icosahedral quasicrystals. The porosity level has been observed to fluctuate between values of 0.0 and 3.75 percent along the length of Bridgman single crystals implying that the development of porosity is affected by the local growth conditions. Experiments were conducted to evaluate the influence of the rate of solidification on the occurrence of porosity. Alloys were solidified with different growth rates, 1mm/hr and >10 mm/hr, using the Bridgman configuration and at different cooling rates, ranging from 0.29°C/hr to 10°C/hr, using the flux growth method. Porosity levels were analyzed via optical image analysis. These experiments indicate that porosity percentages are greatly influenced by cooling rates and crystal size.
机译:已经进行了生长实验,以表征Bridgman和Grux种植Al-Pd-Mn IcosaheDral拟替代术中孔隙率的发生和发展。已经观察到孔隙率水平沿着沿着Bridgman单晶的长度的值波动,这意味着孔隙率的发育受到局部生长条件的影响。进行实验以评估凝固率对孔隙率的影响。用不同的生长速率,1mm / hr和> 10mm / hr,使用Bridgman构型和不同的冷却速率,使用助焊剂生长方法,以0.29℃/ hr至10°C / hr的不同冷却速率固化合金。通过光学图像分析分析孔隙率水平。这些实验表明,孔隙率百分比受冷却速率和晶体尺寸的大大影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号