首页> 外文会议>IEEE International Conference Power Industry Computer Applications >Security Constrained Unit Commitment for open markets
【24h】

Security Constrained Unit Commitment for open markets

机译:开放市场的安全约束单位承诺

获取原文
获取外文期刊封面目录资料

摘要

For many electric power systems the limitations of the transmission network strongly affect the system operation. In traditional regulated power systems, the operator follows operating rules and procedures to schedule generation so that the power system operates reliably. As the power industry moves towards open markets, it is necessary to develop power system schedules that produce high-quality nondiscriminatory schedules that are consistent with secure operation. This paper describes the Security Constrained Unit Commitment (SCUC) program that has been developed to meet this need. The SCUC program optimizes the scheduled generation and price-sensitive load while satisfying generation, reserve requirements, transmission constraints, and generator operating constraints such as minimum up and down times. The transmission constraints modeled are of two types: branch-flow constraints insuring that line and interface thermal limits are satisfied (for steady-state operating conditions) for the forecasted network configuration and for the configuration with a specified set of network and generator outages (i.e. contingencies). These constraints, which are enforced in a preventive mode, an automatically generated by the program; and import and export constraints limiting the generation from specified generators and loads. These constraints which can be used to model voltage and dynamic security constraints, are developed using offline analysis and are inputs to the program. This paper describes the methods used to develop secure schedules and describes our experience using this program.
机译:对于许多电力系统,传输网络的局限性强烈影响系统操作。在传统的调节电力系统中,操作员遵循操作规则和程序来安排生成,使得电力系统可靠地运行。随着电力行业走向开放市场,有必要开发生产电力系统调度,从而产生与安全操作一致的高质量无敌程度的计划。本文介绍了为满足这种需求而开发的安全受限单元承诺(SCUC)计划。 SCUC程序优化预定的生成和价格敏感负载,同时满足生成,储备要求,传输约束和发电机操作约束,例如最小上下时间。建模的传输约束具有两种类型:分支限制确保线路和接口热限制(对于稳态操作条件),用于预测网络配置以及具有指定网络和生成器中断的配置(即突发事件)。这些约束,在预防模式下强制执行,由程序自动生成;并导入和导出约束限制指定生成器和加载的生成。这些可用于模拟电压和动态安全约束的这些约束是使用离线分析开发的,并输入到程序。本文介绍了用于开发安全计划的方法,并描述了我们使用此程序的经验。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号