首页> 外文会议>European conference on applied superconductivity >Characteristics of microstrip-line type microwave high temperature superconducting multiplexer
【24h】

Characteristics of microstrip-line type microwave high temperature superconducting multiplexer

机译:微带线型微波高温超导多路复用器特性

获取原文

摘要

A high temeprature superconducting (HTS) multiplexer of two branch line hybrids and two identical parallel coupled line type bandpass filters was fabricated with a center frequency of 10.9 GHz and a bandwidth of 100 MHz. We used single sided YBa_2Cu_3O_(7-#delta#) (YBCO) epitaxial thin film on MgO substrates prepared by using in situ pulsed laser deposition. Electric connection between adjacent multiplexers was easily done with a microstrip transmission line at the terminations so that the size and weight of the multiplexer could be significantly reduced. The multiplexer showed approximately 0.8 dB insertion loss and 100 MHz bandwidth in a range of -10 dBm to 30 dBm. We observed the third order intercept at 94 dBm and the fifth order intercept point at 86 dBm by using intermodulation distortion (IMD) measurements at T=80K. Our results demonstrate the possibility of realizing a narrow band HTS multiplexer for high performance.
机译:两个分支线混合动力车和两个相同的并联耦合线型带通滤波器的高温超导(HTS)多路复用器具有10.9GHz的中心频率和100MHz的带宽。通过使用原位脉冲激光沉积制备的MgO基板上的单侧YBA_2CU_3O_(7-#delta#)(YBCO)外延薄膜。相邻多路复用器之间的电连接容易在终端处用微带传输线进行,使得可以显着降低多路复用器的尺寸和重量。多路复用器在-10 dBm至30 dBm的范围内显示大约0.8dB的插入损耗和100MHz带宽。通过在T = 80K处使用互调失真(IMD)测量,我们观察到94 dBm的第三阶截距和第五阶截取点。我们的结果表明,实现高性能的窄带HTS多路复用器的可能性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号