首页> 外文会议>ASME Design Engineering Technical Conferences >NUMERICAL ANALYSIS OF ANNULAR FLOW OF YIELD-POWER-LAW FLUIDS
【24h】

NUMERICAL ANALYSIS OF ANNULAR FLOW OF YIELD-POWER-LAW FLUIDS

机译:产量 - 动力法流体环形流动的数值分析

获取原文

摘要

Fully developed laminar axial flow of yield-power-law fluids in eccentric annuli has been investigated numerically. The annuli may be fully open or partially blocked. General non-orthogonal, boundary-fitted curvilinear coordinates have been used to accurately model the irregular annular geometry due to the presence of a flow blockage. A computer code has been developed using a second-order finite-difference scheme. An exponential model for the shear stress, valid for both yielded and unyielded regions of the flow, is used in the computation. The effects of pressure gradient, eccentricity, and blockage height on the flow rate have been studied and the results are presented. The flow rate is found to increase with increasing eccentricity for eccentric annuli without any blockage. For partially blocked eccentric annuli, the flow rate at a particular eccentricity decreases as the blockage height is increased.
机译:在数值上研究了偏心留言中的产量 - 功率法流体的完全开发的层状轴流。 Annuli可以完全打开或部分被阻止。一般非正交,边界拟合曲线坐标已被用于精确地模拟由于流动阻塞的存在而模拟不规则的环形几何形状。已经使用二阶有限差分方案开发了计算机代码。在计算中使用了用于剪切应力的指数模型,用于流动的产生和未粘贴的区域的屈服和未粘附的区域。已经研究了压力梯度,偏心和堵塞高度对流速的影响,并提出了结果。发现流速随着偏心花的偏心率而没有任何堵塞,增加。对于部分阻挡的偏心载荷,当堵塞高度增加时,特定偏心度的流速减小。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号