JOINT calibration and motion estimation in weight-bearing cone-beam CT of the knee joint using fiducial markers

摘要

Recently, C-arm cone-beam CT systems have been used to acquire knee joints under weight-bearing conditions. For this purpose, the C-arm acquires images on a horizontal trajectory around the standing patient, who shows involuntary motion. The current state-of-the-art reconstruction approach estimates motion based on fiducial markers attached to the knee. A drawback is that this method requires calibration prior to each scan, since the horizontal trajectory is not reproducible. In this work, we propose a novel method, which does not need a calibration scan. For comparison, we extended the state-of-the-art method with an iterative scheme and we further introduce a closed-form solution of the compensated projection matrices. For evaluation, a numerical phantom and clinical data are used. The novel approach and the extended state-of-the-art method achieve a reduction of the reprojection error of 94% for the phantom data. The improvement for the clinical data ranged between 10% and 80%, which is followed by the visual impression. Therefore, the novel approach and the extended state-of-the-art method achieve superior results compared to the state-of-the-art method.