首页> 外文会议>ASME Internal Combustion Engine Division technical conference >NUMERICAL INVESTIGATION OF FUEL EFFECTS ON SOOT EMISSIONS AT HEAVY-DUTY DIESEL ENGINE CONDITIONS
【24h】

NUMERICAL INVESTIGATION OF FUEL EFFECTS ON SOOT EMISSIONS AT HEAVY-DUTY DIESEL ENGINE CONDITIONS

机译:重型柴油机工况下燃油对烟尘排放的数值研究

获取原文
获取外文期刊封面目录资料

摘要

Gasoline compression ignition (GCI) engine technology has shown the potential to achieve high fuel efficiency with low criteria pollutant emissions. In order to guide the design and optimization of GCI combustion, it is essential to develop high-fidelity simulation tools. Building on the previous work in computational fluid dynamic (CFD) simulations of spray combustion, this work focuses on predicting the soot emissions in a constant-volume vessel representative of heavy-duty diesel engine applications for an ultra-low sulfur diesel (ULSD) and a high reactivity (Research Octane Number 60) gasoline, and comparing the soot evolution characteristics of the two fuels. Simulations were conducted using both Reynolds Averaged Navier-Stokes (RANS) and Large Eddy Simulation (LES) turbulence models. Extensive model validations were performed against the experimental soot emissions data for both fuels. It was found that the simulation results using the LES turbulence model agreed better with the measured ignition delays and liftoff lengths than the RANS turbulence model. In addition, two soot models were evaluated in the current study, including an empirical two-step soot formation and oxidation model, and a detailed soot model that involves poly-aromatic hydrocarbon (PAH) chemistry. Validations showed that the separation of the flame lift-off location and the soot lift-off location and the relative natural luminosity signals were better predicted by the detailed soot model combined with the LES turbulence model. Qualitative comparisons of simulated local soot concentration distributions against experimental measurements in the literature confirmed the model's performance. CFD simulations showed that the transition of domination from soot formation to soot oxidation was fuel-dependent, and the two fuels exhibited different temporal and spatial characteristics of soot emissions. CFD simulations also confirmed the lower sooting propensity of gasoline compared to ULSD under all investigated conditions.
机译:汽油压缩点火(GCI)发动机技术已显示出实现高燃油效率和低标准污染物排放的潜力。为了指导GCI燃烧的设计和优化,必须开发高保真仿真工具。在以前的喷雾燃烧计算流体动力学(CFD)模拟工作的基础上,这项工作着重于预测恒定体积容器中的烟尘排放,该容器代表了超低硫柴油(ULSD)和重型柴油发动机应用的重型柴油机应用。高反应性(研究用辛烷值60)汽油,并比较了两种燃料的烟尘释放特性。使用雷诺平均Navier-Stokes(RANS)和大涡模拟(LES)湍流模型进行了模拟。针对两种燃料的实验性烟尘排放数据进行了广泛的模型验证。发现使用LES湍流模型的仿真结果与RANS湍流模型相比,与测得的点火延迟和升空长度更好地吻合。此外,在当前研究中评估了两个烟灰模型,包括经验性两步烟灰形成和氧化模型,以及涉及多芳烃(PAH)化学的详细烟灰模型。验证表明,通过详细的烟尘模型与LES湍流模型相结合,可以更好地预测火焰分离位置和烟灰分离位置以及相对自然光度信号的分离。在文献中模拟的局部烟尘浓度分布与实验测量值的定性比较证实了该模型的性能。 CFD仿真显示,从碳烟形成到碳烟氧化的控制过程与燃料有关,并且两种燃料表现出不同的碳烟排放时空特征。在所有调查条件下,CFD模拟还证实了与超低硫汽油相比,汽油的烟so倾向更低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号