首页> 外文会议>AIAA space forum;AIAA/AAS astrodynamics specialist conference >Trajectory Design Employing Convex Optimization for Landing on Irregularly Shaped Asteroids
【24h】

Trajectory Design Employing Convex Optimization for Landing on Irregularly Shaped Asteroids

机译:利用凸优化降落在不规则形状小行星上的轨迹设计

获取原文

摘要

Mission proposals that land spacecraft on asteroids are becoming increasingly popular. However, in order to have a successful mission the spacecraft must reliably and softly land at the intended landing site with pinpoint precision. The problem under investigation is how to design a propellant optimal powered descent trajectory that can be quickly computed onboard the spacecraft, without interaction from the ground control. The propellant optimal control problem in this work is to determine the optimal finite thrust vector to land the spacecraft at a specified location, in the presence of a highly nonlinear gravity field, subject to various mission and operational constraints. The proposed solution uses convex optimization, a gravity model with higher fidelity than Newtonian, and an iterative solution process for a fixed final time problem. In addition, a second optimization method is wrapped around the convex optimization problem to determine the optimal flight time that yields the lowest propellant usage over all flight times. Gravity models designed for irregularly shaped asteroids are investigated. Success of the algorithm is demonstrated by designing powered descent trajectories for the elongated binary asteroid Castalia.
机译:将航天器降落在小行星上的任务建议越来越受欢迎。但是,为了成功完成任务,航天器必须以精确的精度可靠,轻柔地降落在预定的降落地点。研究中的问题是如何设计一种可以在航天器上快速计算,而无需地面控制器交互作用的推进剂最佳动力下降轨迹。在这项工作中,推进剂的最佳控制问题是要确定最佳的有限推力矢量,以便在存在高度非线性重力场的情况下,将航天器降落在指定位置,并要遵守各种任务和操作约束。拟议的解决方案使用凸优化,比牛顿模型具有更高保真度的重力模型,以及针对固定最终时间问题的迭代求解过程。另外,第二种优化方法围绕凸优化问题而确定,以确定在所有飞行时间内使用最低推进剂的最佳飞行时间。研究了为不规则形状的小行星设计的重力模型。通过为细长的二元小行星Castalia设计动力下降轨迹来证明算法的成功。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号