首页> 外文会议>IEEE International Ultrasonics Symposium >Improving lateral resolution in ultrasonic Imaging by utilizing nulls in the beam pattern
【24h】

Improving lateral resolution in ultrasonic Imaging by utilizing nulls in the beam pattern

机译:利用波束方向图上的零点提高超声成像的横向分辨率

获取原文

摘要

Reduction of lateral sidelobes results in improved ultrasonic imaging. In general, apodization is used to lower sidelobes in exchange for increasing the width of the mainlobe and thus decreasing lateral resolution. Null Subtraction Imaging (NSI) is a technique that uses different on-receive apodizations on copies of the same image to to reduce sidelobe levels while also improving lateral resolution. In the NSI technique, several apodization functions are applied on receive. The first apodization weight is applied having a zero mean value when summed across the aperture. This places a null at the broadside of the receive pattern. The second apodization is the same as the first apodization except that a constant offset in weight is applied (non-zero mean). The third apodization is the transpose of the second. The images created with the different weighting schemes are then added to form a new image with improved sidelobe performance and dramatically better lateral resolution compared to conventional apodization. To evaluate the performance of this technique, experiments were performed with an ATS539 phantom containing wire targets to assess lateral resolution and cylinder targets to assess contrast. A 9L4 array was used in the measurements connected to an Ultrasonix RP system with a SonixDAQ. Plane waves were emitted from the array and ultrasound echoes were received by each array element. Image reconstruction involved using Delay and Sum beamforming with apodization. Images were constructed using NSI and compared with rectangular weighted apertures. In experiments, the lateral resolution was observed to improve by a factor of five or better when compared to rectangular apodization. Image quality was assessed by estimation of lateral resolution (-3-dB receive beamwidth), the mainlobe to sidelobe ratio (MSR) in dB and estimation of the contrast-to-noise ratio (CNR). At f/# = 1 focusing with NSI, the -6-dB beamwidth on receive as measured from a small wire target in th- ATS phantom was 0.414λ. Sidelobes were observed to decrease at each f/# by an average of 17 dB with NSI compared to rectangular apodization. However, contrast of hyperechoic targets were lost when utilizing the NSI scheme.
机译:减少侧旁瓣可改善超声成像。通常,切趾被用于降低旁瓣,以换取增加旁瓣的宽度,从而降低横向分辨率。零差减影成像(NSI)是一种在同一图像的副本上使用不同的接收切趾的技术,以减少旁瓣水平,同时还提高了横向分辨率。在NSI技术中,接收时应用了几种变迹功能。当对整个孔求和时,应用第一切趾权重具有零平均值。这会在接收模式的最宽处放置一个空值。第二个变迹与第一个变迹相同,不同之处在于应用了恒定的权重偏移(非零均值)。第三次切趾是第二次切趾的转座。与传统的切趾法相比,使用不同加权方案创建的图像随后被添加以形成具有改进的旁瓣性能和显着更好的横向分辨率的新图像。为了评估该技术的性能,对包含导线目标的ATS539体模进行了实验,以评估横向分辨率,并通过圆柱目标对对比度进行了评估。在连接到具有SonixDAQ的Ultrasonix RP系统的测量中,使用了9L4阵列。从阵列发射平面波,每个阵列元件接收超声回波。图像重建涉及使用具有切趾的Delay和Sum波束形成。使用NSI构造图像,并与矩形加权光圈进行比较。在实验中,与矩形切趾相比,观察到的横向分辨率提高了五倍或更高。通过估计横向分辨率(接收波束宽度为3-dB),以dB为单位的主瓣与旁瓣之比(MSR)以及对比度与噪声比(CNR)的评估来评估图像质量。在f /#= 1时,使用NSI聚焦时,从th-ATS体模中的小导线目标测得的接收时的-6dB波束宽度为0.414λ。与矩形切趾相比,NSI观察到旁瓣在每个f /#处平均降低17 dB。但是,使用NSI方案时,高回声目标的对比度丢失了。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号