Non-symmetrical semi-active vibration control based on synchronized switching damping

摘要

An unsymmetrical switch circuit is designed for semi-active control method based on synchronized switching damping principle of piezoelectric actuators. A bypass capacitor and an additional switch are used to realize unsymmetrical bipolar voltage. The control logic of the switches is introduced in detail and the switched voltages, which directly influence the control performance, are derived as functions of the vibration amplitude and the outputs of the voltage sources. Simulations were carried out to verify the design circuit and the theoretical results of the switched voltage. The voltage ratio increases with increasing bypass capacitance, but its increasing rate decreases. The results show that large bypass capacitor is needed to realize a voltage ratio of 3, which is common in some piezoelectric actuator such as MFC.