首页> 外文会议>IEEE Energy Conversion Congress and Exposition >A High Frequency Signal Injection based Optimum Reference Flux Searching for Direct Torque Control of a Three-Level Traction Drive
【24h】

A High Frequency Signal Injection based Optimum Reference Flux Searching for Direct Torque Control of a Three-Level Traction Drive

机译:基于高频信号注入的最佳参考磁通量,用于三级牵引驱动器直接扭矩控制

获取原文

摘要

Direct torque control (DTC) is widely used in both industries and academia due to its distinctive advantages, e.g., fast dynamic response and high robustness against motor parameters uncertainties and external disturbances. However, there are also some major drawbacks of conventional DTC, such as large torque ripples and poor efficiency caused due to the use of non-optimal flux references. This paper proposes a model-free extremum seeking control (ESC) algorithm for a three-level (3-L) inverter to reduce torque ripples and improve the drive efficiency. Firstly, the relationship between the stator flux linkage and the magnitude of stator current is analyzed. Then, based on this relationship, an effective high frequency signal injection (HFSI) based ESC algorithm is proposed to determine the optimal reference flux in real-time, leading to a maximum torque per ampere (MTPA) like approach for the 3-L DTC. This method can reduce the time-consuming tuning effort and is very robust to the motor parameters variations. The feasibility and effectiveness of proposed methods are verified by using both simulation and experimental studies.
机译:直接扭矩控制(DTC)由于其独特的优势而广泛应用于行业和学术界,例如快速动态响应和对电机参数不确定性和外部干扰的高稳健性。然而,传统的DTC也存在一些主要的缺点,例如大的扭矩涟漪和由于使用非最佳通量参考而导致的效率差。本文提出了一种用于三级(3-L)逆变器的无模型极值寻求控制(ESC)算法,以减少扭矩涟漪并提高驱动效率。首先,分析定子通量连杆与定子电流的大小之间的关系。然后,基于这种关系,提出了一种基于有效的高频信号注射(HFSI)的ESC算法,以实时确定最佳参考通量,导致3-L DTC的最大扭矩(MTPA),如图3-L DTC的方法。 。该方法可以减少耗时的调谐工作,并且对电动机参数变化非常鲁棒。通过使用模拟和实验研究验证所提出的方法的可行性和有效性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号