首页> 外文会议>World Congress on Medical Physics and Biomedical Engineering >Preoperative in silico analysis of atherosclerotic calcification vulnerability in carotid artery stenting using Finite Element Analysis by considering Agatston score
【24h】

Preoperative in silico analysis of atherosclerotic calcification vulnerability in carotid artery stenting using Finite Element Analysis by considering Agatston score

机译:通过考虑Agatston得分,使用有限元分析术中颈动脉静脉曲张钙化脆弱性的术前分析。

获取原文

摘要

The role of calcification inside fibroatheroma during carotid artery stenting operation is controversial. Cardiologists face a major problem of "plaque vulnerability" during the placement of both balloon and stent, with stiff plaques containing advanced calcifications that break the arterial wall or give rise to unstable thromboembolic stroke. The aim of this work is to evaluate the role of calcification (in terms of material and mechanical properties) in plaque vulnerability and wall rupture and to find plaque maximum resistance before breaking. Image-based models of carotid artery stenting were used and Finite Element Analysis (FEA) was performed to simulate the impact of balloon and stent expansion in the presence of calcified plaques. In detail, a nonlinear static structural analysis was performed on 20 patients acquired using in vivo MDCT angiography. The Agatston Calcium score was obtained for each patient and subject-specific local Elastic Modulus was calculated. The in silico results showed that by imposing maximum ultimate external load of 1.2MPa and 4.2MPa on balloon and stent respectively, average ultimate stress of 55.7+41.2kPa and 171±41.2kPa as well as average Plaque Wall Stress of 19.03 + 16.05kPa and 64.3 + 63.3kPa were obtained on calcifications, respectively. Elastic and plastic strain average values of 0.03+0.02 and 0.006 ± 0.01, respectively, were obtained on the calcified plaques after stent expansions. These average data are in good agreement with results obtained by other research groups relative to the values of compressive Elastic Modulus of atherosclerotic plaques and its ultimate stress, strain values after performing carotid artery stenting. Even if our findings are markedly influenced by local geometry and plaque shape, this study enriches the literature in pre-operative prediction of ultimate mechanical parameters in stenting operation to prevent rupture before balloon/stent expansion.
机译:内部纤维粥样瘤钙化的颈动脉支架置入术操作过程中的作用是有争议的。心脏病专家都气囊和支架放置过程中面临的“易损斑块”的重大问题,与包含破坏动脉壁或引起不稳定血栓栓塞性中风先进的钙化僵硬斑块。这项工作的目的是评估钙化的作用(在材料和机械性能方面)的易损斑块和壁破裂并打破之前找到斑块最大阻力。颈动脉支架的基于图像的模型,用于与有限元分析(FEA)中进行,以模拟球囊和支架扩张的钙化斑块的存在的影响。详细地说,利用在体内血管造影MDCT获得的20名患者进行了非线性静态结构分析。用于计算局部弹性模量各患者和特定主题而获得盖斯顿钙分数。的在计算机芯片上的结果表明,通过分别对气球和支架施加为1.2MPa和4.2MPa的最高到达外部负载,平均极限应力的55.7 + 41.2kPa和171±41.2kPa以及19.03 + 16.05kPa的平均斑块壁的应力和64.3 + 63.3kPa分别于钙化获得。弹性和0.03 + 0.02和0.006±0.01塑性应变的平均值,分别在支架扩张后的钙化斑块获得。这些平均数据与相对于粥样硬化斑块的压缩弹性模量和它的最终应力,应变值的值执行颈动脉支架置入术后其他研究小组获得的结果非常一致。即使我们的研究结果得到显着由局部几何形状和斑块形状的影响,这项研究丰富了最终的机械参数的手术前预测文献中支架术操作,以防止破裂前气囊/支架扩张。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号