首页> 外文会议>International conference on chemical engineering, metallurgical engineering and metallic materials >Decolorization of Direct yellow R dye from aqueous solution by Aluminum anode electrochemical
【24h】

Decolorization of Direct yellow R dye from aqueous solution by Aluminum anode electrochemical

机译:铝阳极电化学从水溶液中直接黄R染料脱色

获取原文

摘要

The present study applied Aluminum anode electrochemical method to decolorize direct yellow R wastewater.Experiments were conducted in electrochemical cell system with dimensions of 60 mm × 40 mm × 2 mm,a steel cathode and aluminum anode.Decolorization efficiency and electrical energy consumption were also calculated to compare optimal values.The effects of factors consist of current density,initial pH,initial dye concentration and electrolyte solution concentration on color removal efficiency have been also investigated.The results of study suggested that direct yellow R dye decolorization was very effective by using treatment technique applied in the study.The optimal values of impact factors were also indicated by.The initial dye concentration of 50 mg/l,initial pH value of 6.76,and current density of 2.5 mA/cm2 and Na2SO4electrolyte concentration of 0.1mol/L were optimal conditions for dye decolorization.Besides that,the dye decolorization might reached the highest efficiency of 96.1% once it was conducted at temperature of 20°C,electrode distance of 16 mm and electrolyte time of 60 minutes.Energy consumption for decolorization in conditions mentioned above was 2.399 kWh/kg-dye.
机译:本研究采用铝阳极电化学方法对直接黄R废水进行脱色。在尺寸为60mm×40mm×2mm的电化学池系统,钢阴极和铝阳极中进行了脱色实验,并计算了脱色效率和电能消耗研究了电流密度,初始pH,初始染料浓度和电解质溶液浓度等因素对脱色效率的影响。研究结果表明,直接黄R染料的脱色处理是非常有效的。染料的初始浓度为50 mg / l,初始pH值为6.76,电流密度为2.5 mA / cm2,Na2SO4电解质浓度为0.1mol / L,表明了影响因素的最佳值。染料脱色的最佳条件。此外,染料脱色可能达到96的最高效率在20°C的温度,电极距离为16 mm,电解质的时间为60分钟的条件下进行一次转化的电导率为0.1%。在上述条件下脱色的能耗为2.399 kWh / kg染料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号