首页> 外文会议>2011 IEEE International Conference on Systems, Man, and Cybernetics >A novel radiation-free shoulder joint stiffness evaluation protocol using non-invasive ultrasonographic images
【24h】

A novel radiation-free shoulder joint stiffness evaluation protocol using non-invasive ultrasonographic images

机译:使用非侵入性超声图像的新型无辐射肩关节僵硬度评估方案

获取原文

摘要

Subluxation of the affected shoulder in post-stroke patients has been associated with the nerve disorder and muscle fatigue. Clinicians must be able to accurately and reliably measure inferior glenohumeral subluxation of patients in order to provide appropriate treatment. However, the quantitative glenohumeral joint (GHJ) glide and stiffness evaluation methods are still under developed. The purpose of this study was to find an optimal testing condition to evaluate the inferior GHJ stiffness. A custom-made chair was used to position subjects stably and applying multistage inferior testing loads (0N, 30N, 60N, 90N and 120N), the glides between anterior-superior surface of humeral head and coracoid in different testing conditions were accessed in 7 healthy volunteers with ultrasonography. Eight testing conditions were defined by different test loading mechanisms (DL and IDL), shoulder constrain conditions (CS and NCS), and loading modes (DW, DUA, BUA and BFA). Reliability of measurements was tested between measurements in the same subjects under the same testing conditions with the interval of 24 h. The experiment results showed that the ICC value between measurements is 0.85. There were no statistically significant difference of measurements between DL and IDL (t = 0.218, p = 0.831) and between CS and NCS (t = −0.235, p = 0.818). There were statistically significant relationship of assessments between DW and DUA (r = 0.849, p = 0.016), between DW and BUA (r = 0.821, p = 0.023) and between DUA and BUA (r = 0.854, p = 0.015). It is suggested that the testing condition using a set of pulleys, constraining the unloaded shoulder, bending elbow and loading on upper arm might be the optimal testing condition for measuring the inferior GHJ stiffness. Under the optimal testing condition, the average inferior GHJ stiffness is 23.2N/mm.
机译:中风后患者患病肩膀的半脱位与神经疾病和肌肉疲劳有关。临床医生必须能够准确可靠地测量患者的下肱骨半脱位,以便提供适当的治疗。但是,定量盂肱关节(GHJ)滑行和刚度评估方法仍在开发中。这项研究的目的是找到最佳的测试条件,以评估GHJ的下劲度。使用定制的椅子稳定地放置受试者,并施加多阶段的下测试负荷(0N,30N,60N,90N和120N),在7个健康人的不同测试条件下,获得了肱骨头的前上表面和喙突之间的滑动超声检查的志愿者。通过不同的测试加载机制(DL和IDL),肩部约束条件(CS和NCS)以及加载模式(DW,DUA,BUA和BFA)定义了八个测试条件。在相同测试条件下,以24小时为间隔,在同一受试者的两次测量之间测试测量的可靠性。实验结果表明,两次测量之间的ICC值为0.85。 DL和IDL之间(t = 0.218,p = 0.831)以及CS和NCS之间(t = -0.235,p = 0.818),测量值在统计上没有显着差异。 DW和DUA之间(r = 0.849,p = 0.016),DW和BUA之间(r = 0.821,p = 0.023)和DUA和BUA之间(r = 0.854,p = 0.015)有评估的统计学显着关系。建议使用一组皮带轮,约束无肩负重,肘部弯曲和上臂负重的测试条件可能是测量GHJ刚度较差的最佳测试条件。在最佳测试条件下,平均GHJ劣质硬度为23.2N / mm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号