首页> 外文会议>Ultrasonics Symposium (IUS), 2009 >Shear viscosity measurement using Vibration- Controlled Transient Elastography
【24h】

Shear viscosity measurement using Vibration- Controlled Transient Elastography

机译:使用振动控制的瞬态弹性成像技术测量剪切粘度

获取原文

摘要

Vibration-Controlled Transient Elastography (VCTE¿) has been successfully applied to quantify stiffness in the liver of human patients with chronic viral hepatitis C. However, this technique is based on the measurement of the shear wave group velocity and does not take advantage of the shear wave dispersion in the frequency domain, which is related to the viscosity of the medium. In this work, we propose two methods to measure shear viscosity using VCTE¿. The first method is based on the measurement of the shear wave phase velocity at several frequencies. The second method relies on the decrease of the signal spectral centroid as a function of depth. These methods are first tested on simulated data obtained using a Green's function approach. Simulations are performed for shear wave velocities in the range of 1.0 to 4.5 m/s and shear viscosities in the range of 0.5 to 3.0 Pa.s. They show that using these techniques, it is possible to measure shear viscosity using VCTE¿. Shear viscosity measurements are also performed in the liver in vivo. The mean shear viscosity obtained from 6 healthy volunteers is close to 1.8 Pa.s.
机译:振动控制的瞬态弹性成像技术(VCTE ¶ )已成功应用于量化慢性丙型肝炎病毒患者的肝脏硬度。但是,该技术基于测量剪切波群速度,而没有利用剪切波在频域中的色散,这与介质的粘度有关。在这项工作中,我们提出了两种方法来使用VCTE ¿ 测量剪切粘度。第一种方法是基于在几个频率上测量剪切波相速度。第二种方法依赖于信号频谱质心随深度的减少。这些方法首先在使用格林函数方法获得的模拟数据上进行测试。对剪切波速度在1.0到4.5 m / s的范围内以及剪切粘度在0.5到3.0 Pa.s的范围内进行了仿真。他们表明,使用这些技术,可以使用VCTE ÂÂ,测量剪切粘度。还可以在体内肝脏中进行剪切粘度测量。从6名健康志愿者那里获得的平均剪切粘度接近1.8Pa.s。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号