首页> 外文会议>FISITA world automotive congress >CNG PROTOTYPE VAN WITH CO_2 EMISSIONS TARGET OF 120 g/km
【24h】

CNG PROTOTYPE VAN WITH CO_2 EMISSIONS TARGET OF 120 g/km

机译:具有120 g / km的CO_2排放目标的CNG原型货车

获取原文

摘要

Based on questions of energy saving, the problems of greenhouse gas emissions as well as air quality, the European countries aim at a stronger diversification of energy sources for traffic. Gaseous energy sources, like natural and bio gas should become an essential fundament as fuel, which offer lower CO_2 and pollutant emission even because of their chemical composition, higher energy density and knocking resistance.The research within the project CNG600 was focused on the development of a monofucl CNG standard van with an operation range of more than 600 km. The use of new simulation and experimental methods, the optimization of the manual gear shift powcrtrain, application of a light weight storage system and new gas valve technology lead to extremely low CO_2 emission of about 120 g/km.The gas system of the vehicle was developed for monofucl operation. The methane storage system was extended, which resulted in increased fuel mass in the vehicle. The application of low weight pressure vessels made of composite materials helped to keep the overall vehicle mass low. The gas system was equipped with a new valve technology and separated in high pressure, middle pressure and low pressure sections resulting in an overall optimized system for an automotive application.The vehicle longitudinal performance and fuel consumption were simulated during the development process. Consequently, necessary drive train improvements were defined to ensure lower fuel consumptions in city as well as on highway driving routes. In order to support the fuel efficiency of the propulsion system by low power demand of the vehicle, driving resistance minimization measures were implemented as well. The developed concept was applied on a standard van and realized as prototype.Finally, real world measurements conducted with the prototype vehicle on different driving routes supported the validation of the expected results. Under different driving conditions the CO_2 emissions stayed on a very low level.
机译:基于节能问题,温室气体排放以及空气质量问题,欧洲国家的目标是使交通能源更加多样化。气态能源,例如天然气和沼气,应该成为燃料的基本基础,即使它们的化学成分,较高的能量密度和抗爆震性,它们也能降低CO_2和污染物的排放。 CNG600项目的研究重点是开发工作距离超过600 km的单级CNG标准厢式货车。使用新的模拟和实验方法,优化手动变速齿轮传动系统,应用轻型存储系统和新的气阀技术,可实现约120 g / km的极低二氧化碳排放量。 车辆的气体系统专为单流运行而开发。扩展了甲烷存储系统,从而增加了车辆的燃料质量。由复合材料制成的轻质压力容器的应用有助于将整车质量保持在较低水平。气体系统配备了新的阀门技术,并在高压,中压和低压部分中进行了分离,从而为汽车应用提供了整体优化的系统。 在开发过程中模拟了车辆的纵向性能和油耗。因此,定义了必要的动力传动系统改进措施,以确保降低城市以及公路行驶路线上的燃油消耗。为了通过车辆的低功率需求来支持推进系统的燃料效率,还实施了使行驶阻力最小化的措施。所开发的概念应用于标准货车,并实现为原型。 最后,在不同驾驶路线上使用原型车进行的实际测量结果支持了预期结果的验证。在不同的驾驶条件下,CO_2排放保持在非常低的水平。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号