【24h】

A non-linear frequency synchronization algorithm for TDD-LCR system

机译:TDD-LCR系统的非线性频率同步算法

获取原文

摘要

The frequency synchronization procedure is essential to a mobile set in order to calibrate its reference oscillator. In the TDD Low Chip Rate (LCR) UMTS system after the frequency scan procedure, which alms to find the carrier frequency, an error as great as 20 kHz is expected. The requested maximum frequency offset between the local oscillator and the Node B oscillator is 200 Hz (0.1 ppm.). The aim of this paper is to present a frequency recovery algorithm suited for the TDD/sub LCR/ system and to verify if the requested precision of 0.1 ppm is reachable with the proposed frame format. Many data aided frequency estimators have been proposed in the literature. In this paper the best suitable estimator for TDD/sub LCR/ (Luise et al. (1995)), is fitted to the TDD/sub LCR/ system and an original nonlinear closed loop approach, which improves performance, is proposed. The performance results show that a combination of an open loop estimation with a closed loop configuration, exploiting two different training sequences, ensure a final accuracy of 0.1 ppm, even in the worst environment conditions. The modified nonlinear recursive algorithm, introduced in the closed loop configuration, is a promising approach to increase accuracy and to reduce convergence time.
机译:为了校准其参考振荡器,频率同步过程对于移动设备至关重要。在经过频率扫描程序的TDD低码片率(LCR)UMTS系统中,它很容易找到载频,预计误差会高达20 kHz。本地振荡器和节点B振荡器之间要求的最大频率偏移为200 Hz(0.1 ppm。)。本文的目的是提出一种适用于TDD / sub LCR /系统的频率恢复算法,并验证所提出的帧格式是否可以达到所要求的0.1 ppm精度。文献中已经提出了许多数据辅助的频率估计器。在本文中,最适合TDD / sub LCR /的估计器(Luise等人(1995))适合于TDD / sub LCR /系统,并提出了一种原始的非线性闭环方法,该方法可以改善性能。性能结果表明,即使在最恶劣的环境条件下,开环估计与闭环配置的组合,利用两个不同的训练序列,也可以确保最终精度为0.1 ppm。闭环配置中引入的改进的非线性递归算法是提高准确性和减少收敛时间的一种有前途的方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号