Determination of Tensile Properties of Hemp-Fiber Bundle by Using Tensile Testing Equipment with Raspberry Pi

摘要

Tensile strength of some natural fibers such as hemp is higher than that of steel. To determine tensile properties of hemp fiber, a fiber or bundle is tensile tested with universal testing machine that is controlled by personal computer. This paper presents a small tensile testing equipment that is controlled by Raspberry Pi (RPi), a credit-card-sized single-board computer. General Purpose Input Output (GPIO) pins on RPi were used for controlling the machine crosshead and receiving the tensile load that apply to a hemp bundle. A stepper motor was used to drive the crosshead. Tensile load was measured by using a load measurement system included load-cell, instrument amplifier, and analog-to-digital converter. The applied load and extension were real-time displayed and continuously recorded throughout the test. Testing hemp-fiber bundles with the proposed equipment found that their tensile strength and Young's modulus were 446.75±184.36 MPa and 18.23±8.26 GPa, respectively. These results were in good agreement with the properties founded in other publications. Test results also found that hemp-fiber bundle with smaller diameter showed higher tensile strength than that of larger one.