首页> 外文会议>International Conference on Vocational Education and Electrical Engineering >Effect OF NaOH Treatment on Bending Strength Of The Polyester Composite Reinforce By Sugar Palm Fibers
【24h】

Effect OF NaOH Treatment on Bending Strength Of The Polyester Composite Reinforce By Sugar Palm Fibers

机译:NaOH治疗对糖棕榈纤维聚酯复合材料弯曲强度的影响

获取原文

摘要

The objective of this research is to investigate the effect of NaOH treatment on bending strength of lamina composite reinforced by sugar palm fiber. To know of mechanism fracture can be done with visual inspection of the fracture surface. The Materials used are random sugar palm fibers that have been in the treatment of NaOH, polyester resin and hardener. Sugar palm fibers after washed and dried then soaked NaOH with a long time soaking 0, 2, 4, 6 and 8 hours. The bending test specimens were produced according to ASTM D 790. All specimens were post cured at 62°C for 4 hours. The Bending test was carried out on a universal testing machine. The SEM analysis has conducted to provide the analysis on interface adhesion between the surfaces of fiber with the matrix. The result shows that polyester composite reinforced by sugar palm fiber has highest bending stress 176.77 N/mm~2 for 2 hours of a long time soaking NaOH, the highest flexural strain 0.27 mm for 2 hours of a long time soaking NaOH, elongation 24.05% for 2 hours of a long time soaking NaOH and the highest bending modulus 1.267 GPa for 2 hours of a long time soaking NaOH. Based on the results, it can be concluded that the polyester composite reinforced by sugar palm fiber has the optimum bending properties for a long time soaking 2 hours. The fracture surface shows that the polyester composite reinforced by sugar palm fiber pull out that indicate weakens the bond between fiber and matrix.
机译:本研究的目的是探讨NaOH处理对糖棕榈纤维增强薄层复合材料弯曲强度的影响。为了了解机制骨折可以通过视觉检查裂缝表面来完成。所用的材料是一种随机糖棕榈纤维,其是治疗NaOH,聚酯树脂和硬化剂。洗涤并干燥后的糖棕榈纤维,然后用长时间浸泡0,2,4,6和8小时浸泡NaOH。根据ASTM D 790生产弯曲试样。所有标本均在62℃下固化4小时。弯曲试验在通用测试机上进行。 SEM分析已经进行,以提供纤维表面与基质表面之间的界面粘附分析。结果表明,糖棕榈纤维加强的涤纶复合材料具有最高的弯曲应力176.77 n / mm〜2,搅拌2小时,弯曲应变最高0.27 mm,长时间浸泡NaOH,伸长24.05%长时间浸泡了NaoH和最高弯曲模量的2小时,均长浸泡了NaOH 2小时。基于该结果,可以得出结论,糖棕榈纤维增强的聚酯复合材料具有最佳的弯曲性能,长时间浸泡2小时。骨折表面表明,糖棕榈纤维增强的聚酯复合材料拉出,表示纤维和基质之间的粘合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号