Jet impingement is widely implemented in a variety of engineering applications and industrial processes where high average heat transfer coefficients and the uniformity of the heat transfer over the impinging surface are required to enhance the process and to avoid local hot (or cold) spots. Multiple jet impingement involves several parameters that interfere with the performance of the process, and there are no universal optimal solutions. To ensure the optimization of the process, it is important to understand the influence of these parameters in the heat transfer over the target surface. To perform this study an experimental research will be performed on a purpose-built test facility which has been commissioned, using a Particle Image Velocimetry system. However, to reduce time and costs associated to the experimental tests, it is important to perform a Design of Experiments, that allows to reduce the number of trials, focusing on the parameters that have a greater influence on the process performance. Taguchi's method allows the optimization of the process through the selection of the most suitable parameters values. This work presents the method that must be followed before the development of experiments related to the multiple jet impingement over a complex surface, from the design of the experimental setup to the design of the matrix of experiments.
展开▼
