首页> 外文会议>ASME international conference on ocean, offshore and arctic engineering >ALTERNATIVE METHODOLOGIES FOR SUBSEA FLEXIBLE STRENGTH ANALYSIS
【24h】

ALTERNATIVE METHODOLOGIES FOR SUBSEA FLEXIBLE STRENGTH ANALYSIS

机译:浅层柔性强度分析的替代方法

获取原文

摘要

This paper presents a study of the analysis methodologies used to predict the most likely response of flexibles in a subsea environment, with the aim of determining an efficient and reliable prediction methodology. The most accurate method involves simulating multiple wave realisations of a real world sea state, i.e. irregular waves, and post-processing the results to determine the most probable maximum (MPM). Due to the computationally intensive nature of this approach, however, regular wave analysis is typically used to determine flexible response. This approach considers the maximum wave within a design storm at a desired period; the choice of periods may leave room for uncertainty in the conservatism of the approach. With proper screening, regular wave analysis can be a valid yet overly conservative approach resulting in over design and additional cost. However, if screened incorrectly, there is a possibility that the choice of periods could give results that are under conservative. In addition to regular wave analysis, the paper presents two alternative methodologies to determine the most likely response, with the focus on reducing the computational resources required. The first alternative is an 'Irregular Wave Screen' approach in which the wave train is screened at areas of interest for waves within a user defined threshold of the maximum wave height, in addition to other user defined parameters. Only waves within these parameters are simulated to determine responses. The second alternative is the 'New Wave' approach, which models the most probable wave elevation around the maximum wave crest. The calculated new wave is then placed at the desired location to determine responses. The responses of the Regular, Irregular Wave Screen and New Wave methodologies are compared with the Irregular MPM approach to determine their feasibility to predict the response of flexibles in a real world irregular sea state with lower computational requirements.
机译:本文介绍了一种用于预测海底环境中柔性件最可能响应的分析方法的研究,旨在确定一种有效且可靠的预测方法。最准确的方法包括模拟现实世界海态的多波实现,即不规则波,并对结果进行后处理以确定最可能的最大值(MPM)。但是,由于这种方法的计算量大,因此通常使用规则波分析来确定灵活的响应。这种方法考虑了在期望周期内设计风暴中的最大波浪。时间段的选择可能会在方法的保守性上留下不确定性的余地。通过适当的筛选,定期波浪分析可能是有效但过于保守的方法,从而导致设计过度和额外成本。但是,如果筛选不正确,则时段选择可能会产生保守的结果。除了常规波浪分析外,本文还介绍了两种确定最可能响应的替代方法,重点是减少所需的计算资源。第一种替代方法是“不规则波屏”方法,其中,在其他用户定义的参数之外,在感兴趣区域内筛选波列,以查找用户定义的最大波高阈值内的波。仅模拟这些参数内的波动以确定响应。第二种选择是“ New Wave”方法,该方法模拟最大波峰周围最可能的波高。然后将计算出的新波放置在所需位置以确定响应。将规则波,不规则波屏幕和新波方法的响应与不规则MPM方法进行比较,以确定它们预测具有较低计算要求的现实世界不规则海况中的柔性响应的可行性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号