首页> 外文会议>AIAA/SAE/ASEE joint propulsion conference;AIAA propulsion and energy forum >Development of a 13 kW Hall Thruster Propulsion System Performance Model for AEPS
【24h】

Development of a 13 kW Hall Thruster Propulsion System Performance Model for AEPS

机译:AEPS的13 kW霍尔推力推进系统性能模型的开发

获取原文

摘要

The Advanced Electric Propulsion System (AEPS) program will develop a flight 13kW Hall thruster propulsion system based on NASA's HERMeS thruster. The AEPS system includes the Hall Thruster (HT), the Power Processing Unit (PPU) and the Xenon Flow Controller (XFC). These three primary components must operate together to ensure that the system generates the required combinations of thrust and specific impulse at the required system efficiencies for the desired system lifetime. At the highest level, the AEPS system will be integrated into the spacecraft and will receive power, propellant, and commands from the spacecraft Power and propellant flow rates will be determined by the throttle set points commanded by the spacecraft Within the system, the major control loop is between the mass flow rate and thruster current, with time-dependencies required to handle all expected transients, and additional, much slower interactions between the thruster and cathode temperatures, flow controller and PPU. The internal system interactions generally occur on shorter timescales than the spacecraft interactions, though coordination with the spacecraft commands and telemetry will be at the higher frequency. The AEPS system performance model is designed to account for all these interactions in a way that allows evaluation of the sensitivity of the system to expected changes over the planned mission as well as to assess the impacts of normal component and assembly variability during the production phase of the program. This paper describes the initial efforts toward the system performance model development, correlation to NASA test data, and how the model will be used to evaluate the critical internal and external interactions. The results will ensure the component requirements do not unnecessarily drive the system cost or overly constrain the development program. Finally, the model will be available to quickly troubleshoot any future unforeseen development challenges.
机译:先进的电力推进系统(AEPS)计划将开发基于NASA的HERMeS推进器的飞行13kW霍尔推进器推进系统。 AEPS系统包括霍尔推力器(HT),功率处理单元(PPU)和氙气流量控制器(XFC)。这三个主要组件必须一起运行,以确保系统在所需的系统使用寿命内以所需的系统效率生成推力和比冲的所需组合。在最高级别,AEPS系统将集成到航天器中,并将从航天器中接收动力,推进剂和命令。动力和推进剂流速将由航天器命令的节流阀设定点确定。在系统内,主要控制回路位于质量流率和推进器电流之间,需要时间相关性来处理所有预期的瞬变,并且推进器和阴极温度,流量控制器和PPU之间的相互作用要慢得多。尽管与航天器命令和遥测的协调将以较高的频率进行,但内部系统的相互作用通常发生在比航天器相互作用更短的时间尺度上。 AEPS系统性能模型旨在解决所有这些相互作用,从而评估系统对计划任务中预期变化的敏感性,并评估在生产过程中正常零件和装配可变性的影响。该程序。本文介绍了系统性能模型开发,与NASA测试数据的相关性以及如何将模型用于评估关键的内部和外部交互的初步工作。结果将确保组件要求不会不必要地增加系统成本或过度限制开发程序。最后,该模型将可用于快速解决任何未来无法预料的开发挑战。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号