首页> 外文会议>Chinese Control and Decision Conference >Maneuver trajectory design for hypersonic glide vehicles in dive phase
【24h】

Maneuver trajectory design for hypersonic glide vehicles in dive phase

机译:潜水阶段高超音速滑行车的机动轨迹设计

获取原文

摘要

In this paper, a planning approach of maneuver trajectory based on dynamic inversion is proposed, which can greatly improve the penetrability of hypersonic glide vehicles in dive phase. Maeuvering and guiding overloads are combined using a weight coefficient, which is designed as the function of altitude. Enough adjust ability is guranteed at the end of dive phase, and more complex maneuver trajectories are achieved. Firstly, four different modes of maneuver trajectories are realized by coordinating the maneuver in longitudinal and lateral sub-planes, respectively. Dynamic inversion is employed to establish the relationship between the designed trajectory and the needed overload. Secondly, the minimum energy loss is selected as the optimization index, and the optimal overload is obtained based on the maximum principle. the final path angle constraint is also considered in this algorithm. Finally, the maneuvering and guiding overloads are combined using a weight coefficient, and the corresponding angle of attack and bank are obtained. The approach is tested using common aero vehicle-H (CAV-H) model, and the results demonstrate that the method proposed in this paper can realize the maneuver trajectory in dive phase with high terminal accuracy and strong penetration ability.
机译:提出了一种基于动态反演的机动轨迹规划方法,可以大大提高高超音速滑行车在潜水阶段的可穿透性。机动和引导超载使用权重系数进行组合,该权重系数是根据海拔高度而设计的。在潜水阶段结束时保证足够的调节能力,并获得更复杂的操纵轨迹。首先,通过在纵向和横向子平面上分别协调机动,实现了四种不同的机动轨迹模式。动态反演用于建立设计轨迹与所需过载之间的关系。其次,选择最小能量损失作为优化指标,并基于最大原理获得最优过载。该算法中还考虑了最终的路径角度约束。最后,利用权重系数对操纵和制导过载进行组合,并获得相应的迎角和倾斜角。该方法在通用航空H-C(CAV-H)模型上进行了测试,结果表明,本文提出的方法可以在潜水阶段实现机动轨迹,具有较高的终端精度和较强的穿透能力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号