The design and simulation of the 3MW direct drive wind turbine's controller to decrease vibration of the tower

摘要

Because the environment that the wind turbine runs in is severe, the generating efficiency is low and the vibration of tower is very obvious. The consequence not only causes economic loss but also lead to the reduction of the wind turbine's lifetime. Basing on the traditional PI controlling system, this passage mainly studies to decrease the vibration of the tower by adjusting the controlling PI parameters and adding the tower damper. Establishing the wind turbine's linear, constant, SISO model, selecting the controlling parameters by MATLAB simulation at different isolate wind speed to achieve stable and fast controlling. At different isolate wind speeds, adding the tower damper to decrease the acceleration of tower. At last making global simulation with Bladed to verify and compare the traditional PI strategy with the new strategy. The result of the simulation with Bladed shows the strategy decreases the vibration of the tower and protect the wind turbine.