首页> 外文会议>Global Symposium on Millimeter-Waves >A 32GS/s 8-bit time-interleaved ADC system with 16GHz wideband RF front-end and embedded fully-blind digital calibration
【24h】

A 32GS/s 8-bit time-interleaved ADC system with 16GHz wideband RF front-end and embedded fully-blind digital calibration

机译:具有16GHz宽带RF前端和嵌入式全盲数字校准的32GS / s 8位时间交错ADC系统

获取原文

摘要

This paper implements a time-interleaved ADC (TI-ADC) system with embedded 16GHz wideband track-hold (T/H) front-end. The TI-ADC is characterized with 32GS/s total sampling rate, by time-interleaving 16-channel sub-ADCs with 2GS/s individual sampling rate and 8-bit resolution. A digital blind post-calibration technique based on frequency domain analysis of the TI-ADC output is proposed, which is characterized using a comprehensive TI-ADC behavioral model. The model takes into account the timing, gain and offset mismatch errors. All the three mismatch errors are characterized using the specific basis functions. Without the need of training sequence, a blind calibration model is developed during an iterative loop to extract the mismatch errors, which are subtracted from the measured TI-ADC output successively. A maximum of 3-bit improvement for the effective number of bit (ENOB) has been achieved, resulting in a 6.5 bit ENOB at low-end frequency and 4.5 bit ENOB at high-end frequency. Further, the proposed technique is also effective to wideband signal's sampling.
机译:本文实现了一个具有嵌入式16GHz宽带跟踪保持(T / H)前端的时间交错ADC(TI-ADC)系统。 TI ADC具有32GS / s的总采样率,其特点是通过时间交织的16通道子ADC具有2GS / s的独立采样率和8位分辨率。提出了一种基于TI-ADC输出的频域分析的数字盲后校准技术,该技术使用全面的TI-ADC行为模型进行了表征。该模型考虑了时序,增益和失调失配误差。所有三个失配误差均使用特定的基函数进行表征。无需训练序列,就可以在迭代循环中建立盲校准模型以提取失配误差,然后从测量的TI-ADC输出中连续减去失配误差。有效位数(ENOB)最多可提高3位,从而在低端频率下为6.5位ENOB,在高端频率下为4.5位ENOB。此外,所提出的技术对于宽带信号的采样也是有效的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号