【24h】

Tin whisker growth from tin thin film

机译:锡薄膜产生的锡晶须生长

获取原文

摘要

In this paper, the tin whisker growth from vacuum evaporated Sn thin film is studied. The aim was to characterize the whiskering behavior of submicron thick tin layers which have large grain size. For this purpose, 99.99% pure tin was vacuum evaporated onto 1.5 mm thick copper and ceramic substrates. The average thickness of the tin films was ~400nm with ~1-1.5μm grain size. The samples were stored at room environment for 150 days. Whisker growth was monitored every 15 days by Scanning Electron Microscope (SEM) and at the end of the investigation by a HIROX KH-7700 3D optical microscope. Cross-sections of the layers were prepared by Focused Ion Beam (FIB) to study the change of the layer structure during the test by FIB - Scanning Ion Microscope (SIM). It was found that the submicron thick tin layers with larger grain size on copper substrate can develop large amount and long tin whiskers, as compared to the samples with ceramic substrate which surface remained whisker free. The results indicated that the whiskering was caused by copper-tin intermetallic layer growth between the copper substrate and Sn thin film which resulted in large compressive stress in the Sn thin film.
机译:本文研究了真空蒸发锡薄膜中锡晶须的生长。目的是表征具有大晶粒尺寸的亚微米厚锡层的晶须行为。为此,将99.99%的纯锡真空蒸发到1.5毫米厚的铜和陶瓷基板上。锡膜的平均厚度为〜400nm,晶粒尺寸为〜1-1.5μm。样品在室内环境下保存150天。每15天用扫描电子显微镜(SEM)监测晶须的生长,在研究结束时用HIROX KH-7700 3D光学显微镜监测晶须的生长。通过聚焦离子束(FIB)制备层的横截面,以研究FIB-扫描离子显微镜(SIM)在测试过程中层结构的变化。已经发现,与具有表面无须晶须的陶瓷衬底的样品相比,铜衬底上具有较大晶粒尺寸的亚微米厚的锡层可形成大量且长的锡晶须。结果表明,晶须是由于铜基板和Sn薄膜之间的铜-锡金属间层的生长而引起的,从而导致Sn薄膜中的压应力较大。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号