首页> 外文会议>International conference on semi-solid processing of alloys and composites >Rheological Behavior and Fluidity of Semi-Solid SiCp/A357 Composites with Different SiC Addition Levels
【24h】

Rheological Behavior and Fluidity of Semi-Solid SiCp/A357 Composites with Different SiC Addition Levels

机译:不同SiC含量的半固态SiCp / A357复合材料的流变行为和流动性

获取原文

摘要

The apparent viscosities of the semi-solid SiCp/A357 composites with 0vol.%, 10vol.% and 20vol.% SiC particles manufactured by stir casting were investigated using a Couette type viscometer, and the composite fluidity was examined with a test casting. The results showed that, the viscosities of the semi-solid SiCp/A357 composites decreased with an increase in shear rate, but increased with the increasing of solid fraction, and apparent viscosity of 1 0vol.% SiCp/A357 composite was the lower than that of 20vol.% SiCp/A357 composite at the same solid fraction; and the composite fluidity results were in a good agreement with the viscosity ones.
机译:使用库埃特(Couette)型粘度计研究了通过搅拌浇铸生产的具有0vol。%,10vol。%和20vol。%SiC颗粒的半固态SiCp / A357复合材料的表观粘度,并通过测试浇铸检查了复合材料的流动性。结果表明,半固态SiCp / A357复合材料的粘度随剪切速率的增加而降低,但随固相分数的增加而增加,表观粘度为1 0vol。%SiCp / A357复合材料低于相同固含量的20vol。%SiCp / A357复合材料;复合材料的流动性结果与粘度值吻合良好。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号