Programming Speed Characterization of 0.6μm FLOTOX EEPROM Cell

摘要

Non-volatile memory processes, in particular the EEPROM process, is one the hardest process to be developed. Compared to a CMOS process, the EEPROM process has extra requirements which are high voltage transistors (>16V), EEPROM cells, ONO layers, the buried N+ layer, thin tunnel oxide and stacked poly gates. EEPROM devices are judged on the programming speed, which relates to program high (erase) and program low (write) operations. It is essential that the program high and program low speed of the EEPROM cell is within 1ms with a programming voltage of not more than 16V. Two experiments were setup to improve the programming speed. The first experiment was to increase the high voltage NMOS drain junction breakdown voltage with the source floating (HVNMOS BVDSF), and the second experiment was to scale down the ONO layer. The characterization work to increase the programming speed of the memory cells of a 16k FLOTOX EEPROM device has been carried out. P-field implant dose is optimized to have both the HVNMOS BVDSF and the p-field threshold above 16V for fast programming. A program high threshold voltage (V{sub}tH) of 4.5V and a program low threshold voltage (V{sub}tL) of-0.94V are achieved.