首页> 外文会议>International astronautical congress >DEVELOPMENT OF A SOLAR ARRAY DRIVE MECHANISM FOR THE USE ON MICRO-SATELLITE PLATFORMS
【24h】

DEVELOPMENT OF A SOLAR ARRAY DRIVE MECHANISM FOR THE USE ON MICRO-SATELLITE PLATFORMS

机译:开发用于微卫星平台的太阳能阵列驱动机构

获取原文

摘要

Photovoltaic solar array (PVSA) systems are the most widely used method for spacecraft power generation. However, in many satellite missions, the optimum orientation of the PVSA system is not always compatible with that of the payload orientation. Many methods, have been examined in the past to overcome this problem. Up to date, the most widely used active method for large costly satellites is the solar array drive mechanism (SADM). The SADM serves as the interface between the satellite body and the PVSA enabling the decoupling of their spatial orientation. Non the less, there exists a research and development gap for such systems regarding low cost micro-satellites. The first step of this research individual orbital parameters of various micro-satellites have been extracted, and have been compared to the rotational freedom of the corresponding SADMs used. The findings demonstrated that the implemented SADMs are over designed. It is therefore concluded that these components are not tailored made for each spacecraft mission individually, but rather, exhibit a generic design to full fill a majority of mission profiles and requirements. Motivated by the above analysis, the cardinal objective of the current research is to develop a low cost mechanism that will be precisely tailored for the use of a LEO micro-satellite platform orbiting in altitudes of 500- 1000Km. The design of the mechanism may vary from the existing miniaturized SADMs. For example, the preliminary analysis of the current research suggests, that the conventional use of the slip ring system as the electronic transfer unit can be replaced by a seMI Orientation Unit (MIOU). Systems engineering tools for concept generation and selection have been used. In addition, simulation and mathematical modelling have been implemented on component and system level, to accurately predict the behavior of the system under various modes of operation. The production and system testing of the prototype has taken place and it has verified that the development of such a system, will aid the power generation of the solar arrays, while having a positive impact on the cost reduction of such satellites.
机译:光伏太阳能阵列(PVSA)系统是最广泛使用的航天器发电方法。然而,在许多卫星任务中,PVSA系统的最佳取向并不总是兼容有效载荷方向的。在过去审查了许多方法以克服这个问题。迄今为止,最广泛使用的大型昂贵卫星的活性方法是太阳能阵列驱动机构(SADM)。 SADM用作卫星身体和PVSA之间的界面,使其空间方向的去耦。非较少,存在关于低成本微卫星的这种系统的研发缺口。本研究各种微卫星的个体轨道参数的第一步已经提取,并且已经与所用的相应哀伤的旋转自由进行比较。调查结果表明,已实施的Sadms已经过设计。因此,得出结论,这些组件未单独为每个航天器任务量身定制,而是展示通用设计,以满足大部分特派团概况和要求。通过上述分析,目前研究的基本目标是开发一种低成本机制,可以精确地定制用于使用500-1000km的海拔Leo微卫星平台。该机构的设计可能与现有的小型化的Sadms不同。例如,目前研究的初步分析表明,作为电子传送单元的常规使用作为电子传送单元可以由半定向单元(Miou)代替。已经使用了用于概念生成和选择的系统工程工具。此外,模拟和数学建模已经在组件和系统级别实现,以准确地预测系统在各种操作模式下的行为。原型的生产和系统测试已经发生,已经验证了这种系统的发展,将有助于太阳阵列的发电,同时对这种卫星的成本降低具有积极影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号