首页> 外文会议>IEEE Electronic Components and Technology Conference >A Viscoplastic-Based Fatigue Reliability Model for the Polyimide Dielectric Thin Film
【24h】

A Viscoplastic-Based Fatigue Reliability Model for the Polyimide Dielectric Thin Film

机译:一种基于粘塑料的纤维介质薄膜疲劳可靠性模型

获取原文

摘要

In this study the fatigue characteristics of polyimide thin film used in redistribution interconnects were considered. Cyclic tension tests under various stress-and strain-ranges were performed to investigate the damage accumulation in the thin film. It was observed that, under cyclic strain loading, the deformation of the thin film is mainly governed by viscoelastic stress relaxation behavior, and damage of the thin film is insignificant. On the other hand, the thin film under cyclic stress loading exhibits a viscoplastic ratcheting response. Furthermore, the envelope of the strain response under stress-controlled cycling increases as the fatigue cycle increases. A phenomenological model was developed for characterizing the damage accumulation under cyclic stress condition. The model considers the viscoplastic response by superpositioning a power-law plastic model and a linear viscoelastic model for predicting the growth of the strain envelope. The fatigue prediction model can be applied for predicting the fatigue failure of the polyimide dielectric in the redistribution interconnects.
机译:在这项研究中,考虑了在再分配互连中使用的聚酰亚胺薄膜的疲劳特性。进行各种应力和应变范围下的循环张力试验以研究薄膜中的损伤积累。观察到,在循环菌株负载下,薄膜的变形主要由粘弹性应力松弛行为控制,并且薄膜的损坏是微不足道的。另一方面,循环应力载荷下的薄膜具有粘性棘轮响应。此外,随着疲劳循环的增加,应变控制循环下应变响应的包络增加。开发了一种现象学模型,用于表征循环应力条件下的损伤积累。该模型通过叠加幂律塑料模型和线性粘弹性模型来考虑粘液响应,用于预测应变包络的生长。疲劳预测模型可以应用于预测再分配互连中的聚酰亚胺电介质的疲劳失效。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号