首页> 外文会议>Annual Conference of the IEEE Industrial Electronics Society >An integrated multi-port power converter with small capacitance requirement for switched reluctance machine
【24h】

An integrated multi-port power converter with small capacitance requirement for switched reluctance machine

机译:具有开关磁阻机电容要求小的集成多端口电源转换器

获取原文
获取外文期刊封面目录资料

摘要

This paper presents an integrated multi-port converter(IMPC) for Switched Reluctance Machine (SRM). The conventional drive for SRM is based on asymmetrical H-bridge which needs a large capacitor on the dc bus to absorb the transient energy caused by turn-off process. The proposed topology is a multi-port converter which employs the capacitor as an extra port to the dc bus and is integrated based on switch multiplexing. With such converter, the capacitance can be reduced significantly by increasing the capacitor voltage ripple. In addition, the current commutation process can be accelerated with high voltage of capacitor based on such topology. The requirement of capacitance in asymmetrical H-bridge and the proposed topology is analyzed in detail and the corresponding control method for the proposed converter is introduced briefly as well. Simulation results in Matlab/Simulink verified the feasibility of the proposed topology and its superior performance compared with asymmetrical H-bridge structure.
机译:本文为开关磁阻机(SRM)提供了一个集成的多端口转换器(IMPC)。用于SRM的传统驱动基于不对称的H桥,该桥接在DC总线上需要大电容,以吸收由关断过程引起的瞬态能量。所提出的拓扑是一种多端口转换器,该多端口转换器采用电容器作为直流总线的额外端口,并基于开关复用集成。利用这种转换器,通过增加电容器电压纹波可以显着减小电容。此外,基于此类拓扑结构,电流换向过程可以通过高电容器加速。详细分析了不对称H桥中的电容和所提出的拓扑的要求,并简要地简要地引入了所提出的转换器的相应控制方法。与不对称的H桥结构相比,MATLAB / SIMULINK的仿真结果验证了所提出的拓扑结构及其优越性的可行性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号