首页> 外文会议>International conference on Frontiers of manufacturing science and measuring technology >Measurement of SiC Particle Size Based on Ultrasonic Attenuation Spectrum
【24h】

Measurement of SiC Particle Size Based on Ultrasonic Attenuation Spectrum

机译:基于超声衰减谱的SiC粒径测量

获取原文
获取外文期刊封面目录资料

摘要

To compare the different effects under different excitation methods during the measurement on the particle size of silicon carbide (SiC),an experimental system has been established to get different signal excitations of burst wave,continuous wave and pulsed wave.Variable sound path method is adopted during the measurement to obtain the ultrasonic attenuation spectrum of SiC suspensions with two immersion transducers at four different mass concentrations under the same experimental condition.It is found that the ultrasonic attenuation coefficients excited by three different waves increase with increasing frequency and the tendency is approaching the same.The result calculated by a normalized spectrum of the optimal regularization methods shows that SiC particle size distribution under the three excitation methods is similar,which indicate that the different excitation methods on particle size characterization have almost no influence to result.
机译:为了在测量碳化硅(SIC)的测量期间比较不同励磁方法下的不同效果,已经建立了实验系统以获得突发波,连续波和脉冲波的不同信号激发。采用不可测量的声音路径方法在测量期间,在相同的实验条件下以四种不同的质量浓度在四个不同的质量浓度下获得SiC悬浮液的超声衰减谱。发现,通过增加频率和趋势来增加三种不同波激发的超声衰减系数,并且趋势接近同一。通过最佳正则化方法的标准化谱计算的结果表明,三种激发方法下的SiC粒度分布类似,表明粒度表征的不同激发方法几乎没有影响结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号