首页> 外文会议>International conference on Frontiers of manufacturing science and measuring technology >Measurement of SiC Particle Size Based on Ultrasonic Attenuation Spectrum
【24h】

Measurement of SiC Particle Size Based on Ultrasonic Attenuation Spectrum

机译:基于超声衰减谱的SiC粒径测量

获取原文

摘要

To compare the different effects under different excitation methods during the measurement on the particle size of silicon carbide (SiC),an experimental system has been established to get different signal excitations of burst wave,continuous wave and pulsed wave.Variable sound path method is adopted during the measurement to obtain the ultrasonic attenuation spectrum of SiC suspensions with two immersion transducers at four different mass concentrations under the same experimental condition.It is found that the ultrasonic attenuation coefficients excited by three different waves increase with increasing frequency and the tendency is approaching the same.The result calculated by a normalized spectrum of the optimal regularization methods shows that SiC particle size distribution under the three excitation methods is similar,which indicate that the different excitation methods on particle size characterization have almost no influence to result.
机译:为了比较测量过程中不同激发方式对碳化硅(SiC)粒径的不同影响,建立了一个实验系统来获得突发波,连续波和脉冲波的不同信号激发。采用可变声径法在相同的实验条件下,用两个浸没换能器在四个不同质量浓度下获得SiC悬浮液的超声衰减谱时,发现三种不同波激发的超声衰减系数随频率的增加而增加,并且趋势接近最佳正则化方法的归一化光谱计算结果表明,三种激发方法下的SiC粒径分布相似,表明不同激发方法对粒径表征几乎没有影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号