首页> 外文会议>2011 IEEE 2nd International Conference on Computing, Control and Industrial Engineering >The role of the arc erosion in sever wear of carbon strip/copper contact wire in pantograph-catenry system
【24h】

The role of the arc erosion in sever wear of carbon strip/copper contact wire in pantograph-catenry system

机译:电弧腐蚀在受电弓类别系统中碳带/铜接触线严重磨损中的作用

获取原文

摘要

Experimental tests on friction and wear behavior of copper contact line/carbon strip were carried out under the conditions of different electric current on a pin-on-disc tester. During testing, the coefficient of friction and wear rate were recorded and arc discharge phenomenon was observed. The result indicated that friction coefficient decrease with increase of electric current intensity due to the lubrication role of electric current. As the electric current increased, wear volume distinctly increased due arc discharge ablation. By analysis of SEM micrograph and EDX spectrum on wear surface of carbon strip, it is known that arc erosion, oxidative wear and metal melting are dominant with electric current and abrasive wear and adhesive wear are dominant without electric current.
机译:在圆盘针式测试仪上,在不同电流条件下,对铜接触线/碳带的摩擦磨损性能进行了实验测试。在测试过程中,记录了摩擦系数和磨损率,并观察到电弧放电现象。结果表明,由于电流的润滑作用,摩擦系数随电流强度的增加而减小。随着电流的增加,由于电弧放电烧蚀,磨损量明显增加。通过分析碳带磨损表面上的SEM图像和EDX光谱,可以知道电弧腐蚀,氧化磨损和金属熔化在电流作用下占主导地位,而磨料磨损和粘着剂磨损在电流作用下占主导地位。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号