首页> 外文会议>IEEE International Conference on Computing, Control and Industrial Engineering >The role of the arc erosion in sever wear of carbon strip/copper contact wire in pantograph-catenry system
【24h】

The role of the arc erosion in sever wear of carbon strip/copper contact wire in pantograph-catenry system

机译:电弧腐蚀在容粉 - Catenry系统中碳条/铜接触线的磨损中的作用

获取原文
获取外文期刊封面目录资料

摘要

Experimental tests on friction and wear behavior of copper contact line/carbon strip were carried out under the conditions of different electric current on a pin-on-disc tester. During testing, the coefficient of friction and wear rate were recorded and arc discharge phenomenon was observed. The result indicated that friction coefficient decrease with increase of electric current intensity due to the lubrication role of electric current. As the electric current increased, wear volume distinctly increased due arc discharge ablation. By analysis of SEM micrograph and EDX spectrum on wear surface of carbon strip, it is known that arc erosion, oxidative wear and metal melting are dominant with electric current and abrasive wear and adhesive wear are dominant without electric current.
机译:铜接触线/碳条摩擦和磨损行为的实验试验在销盘测试仪上的不同电流条件下进行。在测试期间,记录摩擦系数和磨损率的系数,并且观察到电弧放电现象。结果表明,由于电流的润滑作用,摩擦系数随着电流强度的增加而降低。随着电流增加,磨损体积明显增加了由于电弧放电消融。通过分析碳条的磨损表面上的SEM显微照片和EDX光谱,已知电弧腐蚀,氧化磨损和金属熔化是用电流的主导,磨料磨损和粘合剂磨损在没有电流的情况下显着。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号