首页> 外文会议>ICCST8;International Conference on Composite Science and Technology >Water Retention in Kenaf/Polypropylene Composites Due to Repeated Immersion and Drying Conditions
【24h】

Water Retention in Kenaf/Polypropylene Composites Due to Repeated Immersion and Drying Conditions

机译:反复浸没和干燥条件导致的Kenaf /聚丙烯复合材料的保水率

获取原文

摘要

Lignocelluloses based natural fibers composites are very prone to water absorption due to OH functional group within cellulose and hemicelluloses of natural fibers. In this work, the water retention in the kenaf/polypropylene (kenaf /PP) composite due to repeated immersion and drying are studied. The composites (40%, 50%, 60% and 70% fiber loading) are immersed in the water and then dried in room condition (24°C and 48 % humidity) for 4 cycles (1 cycle is 10 days of immersion and drying). The parameters are 82 (imply 8 days immersion 2 days drying), 64, 46 and 28 per cycle. Continuous immersion (100% immersion) is used as a reference of water absorption behavior of the composite. The results for 70% fiber loading under minimum drying days of 82, shows that the water retention reduced to 36% from the water absorbed and further drying only reduced to 31%. When the experiment are repeated for several cycles, 70% fiber loading composites shows a decreasing pattern in water retention at the second cycle whereas 40% fiber loading composite showing an increasing pattern. Duration of immersiondrying does play an important role in the amount of water retention in the composite. The water retention of the composites either show an increasing or decreasing pattern depending on kenaf fiber loading and repetition of the immersiondrying for several cycles.
机译:基于木质纤维素的天然纤维复合材料由于天然纤维的纤维素和半纤维素中的OH官能团而非常易于吸水。在这项工作中,研究了由于反复浸泡和干燥而导致的洋麻/聚丙烯(洋麻/ PP)复合材料中的保水率。将复合材料(纤维含量为40%,50%,60%和70%的纤维)浸入水中,然后在室温(24°C和48%湿度)下干燥4个循环(1个循环是浸没并干燥10天) )。参数为每个周期8 \ 2(即浸泡8天\干燥2天),6 \ 4、4 \ 6和2 \ 8。连续浸泡(100%浸泡)用作复合材料吸水性能的参考。在最少干燥天数为8/2的情况下,纤维负载量为70%的结果表明,吸水率使保水率降低至36%,而进一步干燥仅降低至31%。当实验重复几个循环时,在第二个循环中70%的纤维负载复合材料的保水率下降,而40%的纤维负载复合材料则显示电势增长。浸入\干燥的持续时间在复合材料中的保水量方面确实起着重要的作用。复合材料的保水率显示出增加或减少的模式,这取决于洋麻纤维的负载量以及多次浸泡/干燥的重复过程。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号