首页> 外文会议>International conference on physical and numerical simulation of material processing;ICPNS2010 >Effect of sintering process and additives on the properties of cordierite based ceramics
【24h】

Effect of sintering process and additives on the properties of cordierite based ceramics

机译:烧结工艺和添加剂对堇青石基陶瓷性能的影响

获取原文

摘要

@@Cordierite (2MgO·2Al2O3·5SiO2) is a magnesium aluminium silicate possessing an extremely low thermal expansion, low thermal conductivity and high thermal shock resistance. Inspite of numerous attempts and extensive research, cordierite ceramics are still under study due to their low linear thermal expansion and provisional attempts to improve preparation processes by using cheaper precursors. Properties of cordierite based ceramics are greatly dependent on the composition and nature of starting materials, additives and sintering method. Cordierite based ceramics are difficult to sinter without any sintering aids because the sintering must be accomplished by a liquid-phase process. Unfortunately, the properties of cordierite are degraded by sintering aids.
机译:@堇青石(2MgO·2Al2O3·5SiO2)是具有极低的热膨胀,低的热导率和高的耐热冲击性的硅酸铝镁。尽管进行了许多尝试和广泛研究,但堇青石陶瓷由于其低线性热膨胀和临时尝试通过使用便宜的前体来改善制备工艺而仍在研究中。堇青石基陶瓷的性能在很大程度上取决于原料,添加剂和烧结方法的组成和性质。在没有任何烧结助剂的情况下,堇青石基陶瓷难以烧结,因为烧结必须通过液相工艺来完成。不幸的是,堇青石的性能会因烧结助剂而降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号