首页> 外文会议>2010 International Conference on Measuring Technology and Mechatronics Automation >A Nitrogen Dioxide Surface Acoustic Wave Sensor Based on Polyaniline/Tungsten Oxide Nanocomposite
【24h】

A Nitrogen Dioxide Surface Acoustic Wave Sensor Based on Polyaniline/Tungsten Oxide Nanocomposite

机译:基于聚苯胺/氧化钨纳米复合材料的二氧化氮表面声波传感器

获取原文

摘要

A surface acoustic wave sensor (SAW) based on polyaniline/tungsten oxide nanocomposite thin film was used to detect nitrogen dioxide at room temperature in this tudy. Polyaniline/tungsten oxide nanocomposite structure was fabricated from the aniline monomer and tungsten oxide gel. The coupling of modes (COM) theory was used to design the SAW device and simulate the performances of the SAW device. The theoretical simulation of the SAW device was similar to the experimental results. The presented SAW sensor exhibited reversibility and repeatability with reasonable response time when nitrogen dioxide was in ppm level at room temperature.The frequency shift ⊿f/fo of sensor was 0.5 ppm to 11 ppm nitrogen dioxide.
机译:基于聚苯胺/氧化钨纳米复合薄膜的表面声波传感器(SAW)用于检测该室温下室温下的二氧化氮。由苯胺单体和氧化钨凝胶制备了聚苯胺/氧化钨纳米复合材料结构。利用模式耦合(COM)理论设计了声表面波器件并模拟了声表面波器件的性能。 SAW器件的理论仿真与实验结果相似。当室温下二氧化氮为ppm级时,提出的声表面波传感器表现出可逆性和可重复性,并具有合理的响应时间。传感器的频移⊿f/ fo为0.5 ppm至11 ppm二氧化氮。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号