High dynamic range high sensitivity FBG interrogation

摘要

We present a fiber Bragg grating (FBG) interrogation method using a micro-controller board and optical filter that achieves high strain sensitivity and high dynamic range. This interrogation method allows high sensitivity detection of ultrasonic waves superimposed on low-frequency (on the order of 100Hz) vibrations of arbitrary magnitude. One possible application is in-situ structural health monitoring of windmill blades exposed to strong winds by using FBG sensors for detection of ultrasonic waves. Interrogator operation is based on the edge filtering method using a broadband source, fiber Fabry-Perot filter and a micro-controller board which acts as a control feedback loop that locks the filter wavelength to the mid-reflection point on the FBG spectrum. Wavelength locking method allows high sensitivity for edge filtering of high-frequency waves, while the feedback signal is the measurement of low-frequency vibration with high dynamic range. The concept of the interrogator operation and different implementations are described and discussed with experimental results.