首页> 外文会议>32nd IEEE Custom Integrated Circuits Conference >0.18-V input charge pump with forward body biasing in startup circuit using 65nm CMOS
【24h】

0.18-V input charge pump with forward body biasing in startup circuit using 65nm CMOS

机译:0.18V输入电荷泵,在启动电路中使用65nm CMOS进行正向偏置

获取原文

摘要

In this paper, a 0.18-V input three-stage charge pump circuit applying forward body bias is proposed. In the developed charge pump, all the MOSFETs are forward body biased by using the inter-stage/output voltages. By applying the proposed charge pump as the startup in the boost converter, the lower kick-up input voltage of the boost converter can be achieved. To verify the circuit characteristics, four test circuits have been implemented by using 65nm CMOS process. The measured available output current of the proposed charge pump under 0.18-V input voltage can be improved more than 150%. In addition, the boost converter can successfully been boosted from 0.18-V input to the 0.74-V output under 6mA output current. The proposed circuit is suitable for extremely low voltage applications such as harvesting energy sources.
机译:本文提出了一种施加正向本体偏置的0.18V输入三级电荷泵电路。在已开发的电荷泵中,所有的MOSFET通过使用级间/输出电压被正向偏置。通过将建议的电荷泵用作升压转换器中的启动,可以实现升压转换器的较低的启动电压。为了验证电路特性,已经通过使用65nm CMOS工艺实现了四个测试电路。建议的电荷泵在0.18V输入电压下测得的可用输出电流可以提高150%以上。此外,升压转换器可以在6mA输出电流下成功地从0.18V输入升压至0.74V输出。所提出的电路适用于极低电压的应用,例如收集能源。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号