N-CLASS FIRE RESISTANT DIVISIONS IN U.S. NAVAL SHIPS

摘要

The U.S. Navy has now developed an N-Class division system to classify fire resistantboundaries in accordance with MIL-STD-3020, Fire Resistance on U.S. Naval Surface Ships [1].The N-Class division is analogous to the commercial International Maritime Organization (IMO)system (e.g. A-Class) division. The key difference is that N-Class divisions are designed to havesatisfactory fire resistance when exposed to hydrocarbon pool fire (UL 1709 fire exposure)following a shock event. In addition, N-Class is applicable to fire resistant divisions constructedfrom polymer composites structures when they meet the requirements of DDS-078-1 [2].MIL-STD-3020 [1] requires a hydrocarbon pool fire exposure (UL-1709 fire exposure) whichprovides a minimum average total heat flux of 188 kilowatts per square meter (kW/m2) (60,000Btu per square foot/hour (Btu/ft2-h)) within the first 5 minutes of the test exposure. At all timesafter 5 min, the average temperature within the furnace shall be maintained at a minimum of1038 °C (1900 °F) and a maximum of 1149 °C (2100 °F) for the duration of the test. These fireconditions simulate a post-flashover fire scenario for shipboard applications. Performance isdefined as the time period during which assemblies will continue to perform their intendedfunction when subjected to fire exposure. The minimum duration of fire exposure is 30 minutes.Shock testing prior to fire resistance test is performed to ensure that fire resistance of divisions,with fire insulation, penetrations, and associated attachment methods, is not degraded in acombat environment. Shock test specimen size of 1219 by 3048 mm (4 by 10 feet) was selectedto reduce the cost of shipping a full size fire test specimen of 3048 by 3048 mm (10 by 10 feet)or greater to the fire test laboratory. A full scale fire resistance test is still required forqualification purposes after successful completion of the shock test prior to fire resistance test.MIL-STD-3020 [1] also permits AN-Class fire resistant divisions when fire threat is fromcommon combustibles (Class A) and where liquid flammable (Class B) fire threat is nonexistent.AN-Class divisions are those divisions formed by bulkheads and decks that are designed toprotect against structural failure and prevent the passage of flame or hot gases when exposed toIMO Resolution A.754(18) fire exposure [3] after shock testing. For all AN-Class divisions,including those with penetrations, the fire test duration is a minimum of 60 minutes.This paper will discuss fire resistance test results conducted using steel, aluminum, andcomposite substrates.