Design optimization of stiffened composite panels with buckling and damage tolerance constraints

摘要

The design if stiffened, composite wing panels must satisfy a range of requirements related to performance, economy and safety. In particular, the design must be damage tolerant to satisfy a number of different performance requirements for various states of damage. To obtain an optimum configuration that satisfies these requirements simultaneously, optimization code PANOPT was extended with a multi-model capability. First, the effect of damage tolerance constraints on postbuckled optimum design was established for blade- I- and hat-stiffened panels with stiffener flanges embedded in the skin. The "classical" order of efficiency for optimized panels designed for buckling alone (hats, I's, blades) was no longer valid, as the masses of the three panel types were approximately equal. To obtain realistic damage models, the failure mechanisms and damage tolerance of the panel concept with embedded stiffeners were determined in an experimental programme. Finally, the multi-model capability of PANOPT was demonstrated with the simultaneous optimization of an undamaged panel carrying design ultimate load, the same panel with a sedarated stiffener carrying design limit load, and the panel with a cut stiffener carrying seventy percent of the design limit load. An optimum design was found with an additional mass of only five percent compared to a panel optimized for the undamaged case alone.